Originally Posted by
Steve Hubbard
The cam lever can be held in place with an adjustable wrench while the set screw is tightened. Still takes some fiddling, but less frustrating than trying to hold the cam lever by hand.
Steve, I got tired of fiddling around with the cam design and eventually caved and laid out $100+ for the correctly designed "accessory", which now is apparently the standard design on new machines. Felder's refusal at the time to admit to the cam design deficiency, and insistence on charging an exorbitant price for the replacement, still leaves a bad taste in my mouth.
Scott Vroom
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.