[OP]
Member
Hello all, great forum with lots of great information. I am new to the woodworking side of engraving and have a question about sealed wood. I have a Universal laser and need to engrave a plaque that has been stained and sealed with Minwax Polycrylic. Is this safe for the machine? I know there are some things that can damage the lens and I just want to make sure I am not causing any problems. Thanks for the help.
Last edited by Karissa Davis; 11-20-2017 at 10:19 PM.
Moderator
It is safe.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
And easy to clean afterwards.....
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
[OP]
Member
Awesome, I will give it a try this afternoon.
Posting Permissions
Reply With Quote