I am needing opinions & advise about this machine for not limited to, but mostly working with wood.
Thanks, Sam
I am needing opinions & advise about this machine for not limited to, but mostly working with wood.
Thanks, Sam
SAM
This machine selling on Amazon and ebay for around 1800$ is a cheap Chinese import. Most likely not a real 50 watt but an over driven 40 watt tube which will probably not last to long. If your a tinkerer and not afraid to do your own repair work it might not be a bad starter laser, but don't expect to go into business with this machine you'll be in for disappointment. You should be-able to cut 1/8th inch wood ok but it will be slow. engraving will be fair but nothing great. Do expect to engrave beautiful photos on wood .
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander