Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: Today's Project

  1. #1
    Join Date
    May 2010
    Location
    Ambridge, PA
    Posts
    968

    Today's Project

    Once the neighbors wake up, going to see what damage I might be able to do today with this sycamore 1/2 log. 18.5" wide x 9" thick.
    sycamore blank.jpg
    Member Turners Anonymous Pittsburgh, PA

  2. #2
    Join Date
    Dec 2012
    Location
    Bedford, NH
    Posts
    1,286
    Curious. Are you a turner? Little heart wood, much sap wood. Are you going to utilize both?
    Thoughts entering one's mind need not exit one's mouth!
    As I age my memory fades .... and that's a load off my mind!

    "We Live In The Land Of The Free, Only Because Of The Brave"
    “The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living."
    "
    Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill

  3. #3
    Join Date
    Oct 2010
    Location
    Mountain City, TN
    Posts
    573
    How do you like working with sycamore? Somebody told me it's hard to dry out. His words were, " It wouldn't burn in hell."

  4. #4
    Can't wait to see what you get out of that one David.
    I love turning Sycamore, one of my faves!!!

  5. #5
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Quote Originally Posted by David Delo View Post
    Once the neighbors wake up, going to see what damage I might be able to do today with this sycamore 1/2 log. 18.5" wide x 9" thick.
    Nice! Sycamore is great turning wood, strong, very fine grain. It always has interesting ray fleck. I've only turned the sap wood but I understand the heart wood is good too. Since I turn dry wood I cut logs like this mostly into spindle and box sizes (1x1 to 4x4 and larger), wax, then let it air dry the same as other woods. I've never tried face turning it.

    Here's the wood database article on Sycamore if you haven't seen it.
    http://www.wood-database.com/sycamore/

    I see they say Sycamore is sometimes called Lacewood.

    JKJ

  6. #6
    Join Date
    Jan 2004
    Location
    Fredericksburg, TX
    Posts
    2,576
    Looks like a nice natural edge tray/bowl about 18"L x 12-14"W x 5-6"H. That is a favorite section for me to make a mount for faceplate on bark side using Forstner bit and cutoff the extreme points some with either chainsaw or bandsaw. Makes a nice piece for serving with oil finish.

  7. #7
    To get the rays to show, and they can be spectacular, you need to quarter saw the bowl blanks, so natural edge bowls will show the flecking very well, but if you do standard bowl orientation, sycamore can be very plain, or should I say plane (as in plane tree if you didn't get that one...). A platter or two would look really nice also.

    robo hippy

  8. #8
    Here's a plate that shows the grain pattern pretty well.

    syc9x.75.jpg

  9. #9
    I am reminded of the difference between good taste in turning vs flat work. In the flat world, such a platter would be chided for one not have provided good grain match. In the turning world, IMHO, the opposite is true: it is precisely the contrast of the grain that provides the challenge in turning, presenting and finishing the piece. In one world, the it's contrast that is genius; in the other, it's harmony that reigns supreme. I am fascinated by that dichotomy. Many will think I'm waxing ridiculous, but a few bee people (hat tip to Blind Melon) will know exactly what I'm talking about.
    Last edited by Prashun Patel; 12-02-2017 at 3:52 PM.

  10. #10
    Quote Originally Posted by Prashun Patel View Post
    I am reminded of the difference between good taste in turning vs flat work. In the flat world, such a platter would be chided for one not have provided good grain match. In the turning world, IMHO, the opposite is true: it is precisely the contrast of the grain that provides the challenge in presenting and finishing the piece. I am fascinated by that dichotomy. Many will think I'm waxing ridiculous, but a few bee people (bat tip to Blind Melon) will know exactly what I'm talking about.
    Prashun, this is not a glue up, it is a solid piece. If you look closely you can see the continuation of the grain from the sap wood to the heart wood. The straight line of the change from heart to sap wood makes it appear to be two pieces of wood. I'm glad you like it.

  11. #11
    Join Date
    May 2010
    Location
    Ambridge, PA
    Posts
    968
    Well.............what a day. Knew this was going to be heavy duty project but holy mackerel, lugging this blank around and getting it between centers, getting in the chuck etc. etc. has just plain wore me out.

    Not a newbie to coring but 1st time using the Oneway Easy Core. I have a couple slugs of cherry burl that I want to get to but didn't want to use those as the guinea pigs so wanted to practice on something else. Did think hard about doing it natural edge but decided just to do traditional for this first time use.

    Started out with centerline offset towards me with what would have given me 1 1/2 thick bottom. As you'll see in the pics, the small bowl snapped off. Don't know exactly what happen, if I had the support knife positioned wrong or if the clamp block wasn't tight enough and moved or what. Had to remount in the chuck because it shifted slightly and moved the cutter back to centerline and completed the next 2 cores without incident.

    Not enough experience with this rig yet to say better, worse or the same with the McNaughton. Does seem to be more fumbling around adjusting the support & cutter arm positioning but I suppose that will get better with usage. Do like the results of #2 & #3 bowls though. Came out perfect inside and out. Since I moved centerline for the big bowl, it came out with a thicker bottom than I wanted so I'll probably remount that one in a day or two after I recover from today's activities.

    syca1.jpg20171202_131657.jpg20171202_131714.jpg20171202_142504.jpgsyca5.jpg
    Member Turners Anonymous Pittsburgh, PA

  12. #12
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Quote Originally Posted by Toby Bouder View Post
    he straight line of the change from heart to sap wood makes it appear to be two pieces of wood.
    And that line is not even straight. Very nice example of ray fleck!

    sycamore_boundary.jpg

    JKJ

  13. #13
    Yes I know its a solid piece.

  14. #14
    Join Date
    Jul 2008
    Location
    Atikokan, Rainy River district, Ontario
    Posts
    3,540
    Sycamore is a very nice turning wood, similar to but a bit softer than hard Maple in my experience, the ray fleck is nice but shows only on a narrow plane when quarter sawn/cut, the wood has often a very nice pink coloration

    Background is Sycamore, the only picture I have from that piece of wood
    Sycamore background.jpg

    The small goblet is showing the fleck as it is turned in the direction square to the grain.
    natural edge Sycamore.jpg

    This piece has a thin wide rim that shows the fleck on one side and then disappears almost instantaneously.
    Sycamore.jpg

    but other than the coloration it is a quite plain wood.
    Sycamore bowl.jpg

    The Plane tree Robo refers to, is the Hybrid that the English got when cross-breeding the European mainland Platanus orientalis and the N.American Platanus occidentalis, witch has normally single fruit balls, where the European one has normally 2 or 3 or sometimes more fruits hanging in a cluster.

    Then to make things even more confusing, they call a Maple tree a Sycamore , anyway if not planted and growing in he wild over here, it will be a Sycamore (Not the English kind nor a Plane tree).
    Have fun and take care

  15. #15
    I turned a thin walled Sycamore bowl from a green log that I reversed onto a bowl chuck. I left it in the chuck, tightening ever so slightly every day for a couple of weeks and ended up with a really nice wavy edge. It was a very well received bowl and I wish I had kept pictures!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •