Results 1 to 8 of 8

Thread: chuck insert

  1. #1
    Join Date
    Jan 2015
    Location
    greensboro nc
    Posts
    330

    chuck insert

    im looking for a chuck insert,,,not the adapter,,, that goes from a spindle size of 1 1/4 to 1x8,,,,the 1x8 screws into your chuck and the 1 1/4 screws onto your spindle,,,I can find the adaptor but not the insert,,,any help would be appreciated,,,thank you

  2. #2
    Join Date
    Jan 2009
    Location
    Harrisburg, NC
    Posts
    814
    Quote Originally Posted by jeff oldham View Post
    ,the 1x8 screws into your chuck and the 1 1/4 screws onto your spindle
    This is the only type item I know of but I may be reading it wrong. If I am reading it correctly you are looking for an insert (such as a Nova insert) where the exterior is smaller than the interior?
    https://www.pennstateind.com/store/LA11418.html
    "I became insane, with long intervals of horrible sanity." - Edgar Allan Poe

  3. #3
    Join Date
    Jan 2007
    Location
    Ottawa, ON Canada
    Posts
    1,468
    What make and model is the chuck?
    Grant
    Ottawa ON

  4. #4
    Join Date
    Jul 2008
    Location
    Atikokan, Rainy River district, Ontario
    Posts
    3,540
    Quote Originally Posted by jeff oldham View Post
    im looking for a chuck insert,,,not the adapter,,, that goes from a spindle size of 1 1/4 to 1x8,,,,the 1x8 screws into your chuck and the 1 1/4 screws onto your spindle,,,I can find the adaptor but not the insert,,,any help would be appreciated,,,thank you
    You want a spindle adapter rather than a chuck adapter ???, still called an adapter, as it adapts from one size to another, larger or smaller.

    like these, first one goes from small to large, the next one from large to small adapter.jpg
    Have fun and take care

  5. #5
    Join Date
    Feb 2008
    Location
    Southwestern Penna.
    Posts
    329
    I bought mine at Penn State Industries.

  6. #6
    Grizzly t10807

    the two I have run true, work great. Dirt cheap.....

    Is this what you need?

    c

  7. #7
    Join Date
    Dec 2005
    Location
    Suwanee (near Atlanta), GA
    Posts
    842
    I bought a 1 1/4" x 8 Apprentice collet chuck from Craft Supplies for about $90 and it came with one. I use it occasionally to adapt my Nova chuck with a 1 1/4"insert to a mini lathe.
    God is great and life is good!

  8. #8
    Join Date
    Jul 2013
    Location
    Gainesville, GA
    Posts
    36
    Hartville Tool has them $49.99 ea.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •