Results 1 to 10 of 10

Thread: Finial/NoFinial?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Finial/NoFinial?

    This piece is 10 inches in diameter by 23 inches tall. The foot is rosewood. I put a foot on it because I intended to use a rosewood and boxelder finial... It's pretty imposing already, I'm wondering if a finial might be overkill, so your impressions/opinions would be greatly appreciated and strongly considered.
    As a side note, it's the tallest piece I've ever done. It's the first piece that I used the Kobra deep hollowing system that I recently acquired. I don't see how I could turn anything taller on my Mustard Monster... I don't have room in my shop for an extension.
    TallBoxelder.jpg
    Last edited by George Guadiane; 01-05-2018 at 9:05 AM. Reason: silly spelling errors
    Change One Thing

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •