I'm in the final steps of finishing cabinet doors. I'm padding on Waterlox as a final coats - Original and then the Satin (if it matters). I thought I read somewhere that it doesn't cure properly below 60* F. I'm working in my garage and it doesn't look like it's going to be above 55 for the foreseeable future. I'm thinking of using a space heater to heat the garage, then turn it off and do my work until it dries. Is there any additional combustion/explosion risks if doing this? I guess I should also ask if I'm being overly concerned about the temp too?
Thanks so much for all the info learned here.