I am building a cabinet that the face frames will be (stiles) 4" wide x 1 1/2" thick x 84" long. I plan on using loose mortise and tenon to attach the the rail which will be 4' x 1 1/2' x 60"?
What is the best way to assure the ends are square and a successful joint is achieved? My chop saw (cheap Delta) is too short to adeqquately support the longer stock. Would a Skil saw and a square be better here? Or should I set up my table saw (Powermatic 64) and attempt it there?
Thanks in advance,
TIm in Houston