-
CRC Table Guard
I just switched from Topcote to CRC Table Guard and am pleased with the results. I live in Iowa and Summers here are in the 70% humidity range. Goes on clear, no buffing, slippery and so far, no rust. The Topcote seemed to ball up on the bottom of my crosscut sled and the CRC doesn't.
Steven
-
My experience with TopCoat has not been very good. It gets sticky when my damp palm touches it and it tends to allow rust after being handled. Tried it again on my new BW10LTS and same results. So-- went back to using paste wax. Sure works better for me with the humidity in Louisiana. I have never tried the Boeshield products. I have found the best prevention/reduction in rust in my shop is to keep the air moving 24hrs a day with a fan. I do use a tiny window air conditioner but it is way undersized for my space. I don't get rust unless I leave a damp piece of lumber on a metal surface.
Pete
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules