I just got notified that the grinder I ordered has shipped. I'm in desperate need of ideas for a grinder bench. I'd like to get it built this weekend. Photos please! Suggestions please!
I just got notified that the grinder I ordered has shipped. I'm in desperate need of ideas for a grinder bench. I'd like to get it built this weekend. Photos please! Suggestions please!
Last edited by Ken Fitzgerald; 02-17-2006 at 7:27 AM.
Ken
So much to learn, so little time.....
.... Ken, Take a look at some of these, maybe these will give you some ideas .Originally Posted by Ken Fitzgerald
http://www.sawmillcreek.org/showthread.php?t=15492
.
Every man’s work is always a portrait of himself.
Thanks Boyd! I should have searched a little harder!
Ken
So much to learn, so little time.....
I built a 2' x 4' workbench from 2x4's, OSB, and masonite that I use for all my metalworking, sharpening, and grinding. My grinders (a 6" I bought about 5 years ago and my 8" woodcraft) both are mounted to plywood bases with dowels sticking out the bottom. The bench has matching holes so I can drop them into the holes when I use them. When I'm not using them, I can store them out of the way. I also have my Tormek, my sharpening stones, and my mechanics vise on this bench. The non-tempered hardboard top absorbs any spills readily which is actually a good thing. When it goes bad, I can just pull it off and replace it.