Hi Folks,
I finally got around to creating some instructions for a DIY Vacuum Chuck including sources of supply for the parts.
Hi Folks,
I finally got around to creating some instructions for a DIY Vacuum Chuck including sources of supply for the parts.
Last edited by Keith Outten; 01-06-2014 at 3:03 PM.
Bill Esposito
Click on my user name to see the link to My Personal WoodWorking and Tool Review Pages
Very nice, Bill.
I'm wondering why such a large "base plate" for the drums? 'Just curious...
--
The most expensive tool is the one you buy "cheaply" and often...
I left it big in case I ever want it to double as a compression chuck. But you're right, you could cut it down just larger than the largest size cylinder that you intend to use.Originally Posted by Jim Becker
Bill Esposito
Click on my user name to see the link to My Personal WoodWorking and Tool Review Pages
Thanks Bill. You've made it simple and clear.
Glenn ClaboMichigan
Bill, that's awesome!!! Simple and straightforward. Thank you! Actually, if you wouldn't mind, I think this would make for a great piece for our "articles" section. Maybe you could ask Aaron if he could do that for us??? Thanks!!!
Cheers,
John K. Miliunas
Cannot find REALITY.SYS. Universe halted.
60 grit is a turning tool, ain't it?
SMC is totally supported by volunteers and your generosity! Please help if you can!
Looking for something for nothing? Check here!
Thanks Bill!
Making new friends on SMC each and every day