Where's a good place to get handwheels?
Where's a good place to get handwheels?
Reid Tool...I don't have the link, but you can probably find it with a web search.
--
The most expensive tool is the one you buy "cheaply" and often...
Watcha Makin .
Inturra Design has a great BS tensioning hand wheel.
TJH
Live Like You Mean It.
http://www.northhouse.org/
Since you're posting here, I assume it's for a lathe?
I suppose turning it is out of the question...
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
Nope, turning it actually sounds like a good idea. I'm concerned about the life span of it. It's for the tailstock.
Steve
Try Mcmaster carr, they have a very large selection.
Those who sense the winds of change should build windmills, not windbreaks.
Dave Wilson
If you want something sturdy and to make it yourself you can turn both aluminum and brass with your hss tools on a woodworking lathe.Originally Posted by Steve Hayes