Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: New member

  1. #1
    Join Date
    May 2006
    Location
    Some where between Buffalo and Rochester NY
    Posts
    470

    New member

    Hello, I am new to this group and fairly new to woodworking.I enjoy trying to make large pieces like the diplay cabinet that I makeing for my wife. I have enjoyed reading quite a few post here. Just figured I would introduce my self.

  2. #2
    Welcome Al!!!!


  3. #3
    Al,
    Welcome to the creek. The best woodworing forum on the internet, where the water is always just right. Beware though we do have picture police so if you talk about a tool or a project remember to post a picture with it or else they'll tell you it didn't happen. Take some pistures of your shop and post them. Especially your Lathe and bandsaw...

  4. #4
    Welcome to the Creek Al. Lars

  5. #5
    Welcome Al,
    I too am new to this group, it takes time but I'm sure as a wood worm we will work our ways into the larger group of communicators. I am always open to new persons learning new directions in their life skills.
    Again, WELCOME to the "CREEKERS" (that is one of their synonyms)
    George Joehnk

  6. #6
    Al and George (and any other new folks watching)...welcome aboard. Lots of helpful people here, and most of the answers are right. Seriously, the depth and breadth of experience and knowledge here is amazing, and with very few exceptions, even arguments are done politely. We'll be looking forward to pics from both of you.

    - Vaughn

  7. #7
    Join Date
    Mar 2004
    Location
    Toronto, Ontario, Canada
    Posts
    3,789
    Welcome to Saw Mill Creek both Al and George.

    I have learned very very much here in the slightly more than two years I have been a member. I hope that you both find the place as friendly and helpfull as I did and do.

  8. #8
    Join Date
    Oct 2003
    Location
    Vero Beach FL
    Posts
    594
    Welcome Al and George

    Lots of friendly people here, as long as you post pics! (just kidding)

    We all look forward to your posts.

    Jay

  9. #9
    Join Date
    Sep 2003
    Location
    Grand Marais, MN. A transplant from Minneapolis
    Posts
    5,513
    Welcome Guys!
    Be very afraid of those Picture Police They are Scary
    TJH
    Live Like You Mean It.



    http://www.northhouse.org/

  10. #10
    Join Date
    Feb 2003
    Location
    Leesville, SC
    Posts
    2,378
    Al and George,

    Welcome to SMC...
    Army Veteran 1968 - 1970
    I Support the Second Amendment of the US Constitution

  11. #11
    Join Date
    Feb 2003
    Location
    Just outside of Spring Green, Wisconsin
    Posts
    9,442
    Welcome to both of you, Al & George! I think you've stumbled upon one of the premier WW sites around and we'd love to hear more from you! And Al, being new to WW probably means you may have quite a few questions. Never fear in asking them. We ALL had to learn some how and some way. For me, I'm still asking dumb questions but, getting smart answers right here! Come often, stay long and don't forget to include pics whenever you can!
    Cheers,
    John K. Miliunas

    Cannot find REALITY.SYS. Universe halted.
    60 grit is a turning tool, ain't it?
    SMC is totally supported by volunteers and your generosity! Please help if you can!
    Looking for something for nothing? Check here!

  12. #12
    Join Date
    Feb 2003
    Location
    Griswold Connecticut
    Posts
    6,927
    Pleased to meet ya' Al, and welcome to Sawmill Creek.
    Post some pics of your work, we like pictures alot here.

    Once again. Welcome.

  13. #13
    Join Date
    May 2006
    Location
    Some where between Buffalo and Rochester NY
    Posts
    470
    heres the link to where my shop pics are. My shop is 20x25 in the coner of the basment. I am hoping that this winter I will be buying the place I am living at, then I will have a25x60 shop with 9' celings not including about a 25x10 room for the noise makers. http://s78.photobucket.com/albums/j104/Al_Killian/

  14. #14
    Three times as big. Don't get lost in there!!


  15. #15
    Join Date
    Feb 2005
    Location
    Sterling CT
    Posts
    2,473
    as others have said

    welcome to SMC

    lou

Similar Threads

  1. New member
    By Stefan Schoenberger in forum General Woodworking and Power Tools
    Replies: 30
    Last Post: 12-30-2005, 10:28 AM
  2. Thought I Would Introduce Myself -New Member
    By Dennis Collins in forum General Woodworking and Power Tools
    Replies: 29
    Last Post: 10-03-2005, 8:25 AM
  3. New Member...Jessica Singer!
    By Mark Singer in forum General Woodworking and Power Tools
    Replies: 35
    Last Post: 03-09-2005, 5:25 PM
  4. New Member Here.......
    By Corey Hallagan in forum General Woodworking and Power Tools
    Replies: 27
    Last Post: 03-04-2005, 7:52 AM
  5. New Member - First Posting
    By Boyd Gathwright in forum General Woodworking and Power Tools
    Replies: 5
    Last Post: 01-23-2004, 1:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •