Well this weekend was full of duct work hanging for me. In between family get togethers and yard work etc. I was able to spend some time in the shop getting the duct work hung.
So far everything is hung and I'm almost finished sealing the joints. I'm using alum. tape and silicone caulk.
I had to do a little creative shaping with a few adjustable 90's to get the drop to the CMS under and across the I-beam. You can see that in the 3rd and 4th photos.
I did a sound level test yesterday with one gate open (I'm actually waiting for a gate for OAS). The unit measures at 80 - 81 db at 10'. Not too bad. I can hear a few leaks so maybe once I'm completely done it might drop a little.
I should have everything done by the weekend. I need to get the shop back in order, its a disaster!
Thanks for looking,
Mike