In between pens and bottle stoppers, I turned this little weed pot for LOML out of some scrap walnut. I did it mostly for some form practice. Turned between centers, then I used forstner bits to bore the hole and get the spur center marks off the bottom. It was sanded to 1200 grit and finished with just a couple quick coats of wipe-on poly and some Johnson paste wax. Try as I might, I couldn't get a photo without some glare.
Weed Pot 2 499.jpg
Weed Pot 2b 600.jpg
Your critique and suggestions are welcome.
- Vaughn