Results 1 to 3 of 3

Thread: URL references

  1. #1
    Join Date
    Mar 2003
    Location
    Southport, NC
    Posts
    3,147

    URL references

    I would like to suggest that you consider developing a URL Reference tool like that used by WoodNet. Using their tool, I can easily and directly create the following

    Sheet Goods

    This is a much more consise reference that that created by your URL tool which follows.

    http://www.woodmagazine.com/wood/sto...ml&catref=wd22

    Also, with your tool, it causes windows to expand to wider than screen size.

    Just a suggestion, Thanks

    Howie.................
    Howie.........

  2. #2
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,688
    It already exists, Howard, and has been that way since I joined back in 2003. After typing the short text you want to us, select it with your rodent and click on the icon at the top of the edit window that looks like this:

    ScreenHunter_078.jpg

    Then, past in the URL and click on "Ok". You're done.

    The issue with the scrolling is that some folks don't use the WYSIWYG tools and a long URL will necessarily expand the window...as will a picture that is wider than about 600-700 pixels.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  3. #3
    Join Date
    Feb 2003
    Location
    Gloucester, VA
    Posts
    1,996
    See Jim's post
    _Aaron_
    SawmillCreek Administrator

Similar Threads

  1. Traditional Interior Joiner References
    By Bob Smalser in forum Boat Building
    Replies: 1
    Last Post: 09-17-2009, 4:39 PM
  2. Cabriole leg design references?
    By Charlie Schultz in forum General Woodworking and Power Tools
    Replies: 3
    Last Post: 03-30-2006, 7:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •