St. Louis LASER
SMC Member Mike Null has offered to sponsor a FreeStuff Drawing of one of his LaZer Cutting Grids.
The grid size is the winner's choice up to 24"x36" with shipping paid by Mike, anywhere in the Continental. U.S.
The grid is made of aluminum 0.50" thick with half inch square cells. The
grid sits on 3/4" square wood risers with tabs which fit against the rulers
on the engraving table allowing for 0-0 positioning. The risers permit efficient
airflow under the grid for removal of smoke and residue which contaminate
the underside of your work. The 1/2" cells are larger permitting better
smoke evacuation and permitting small waste cuts to fall through to the
table.
This grid is a woodworkers solution to the vector cutting problem.
Efficient, durable and very economical.
Grids sizes and prices are as follows: Sizes are ± 1/4"
12"x18" $49.95
12"x24" 59.95
18"x24" 69.95
24"x36" 89.95
Custom sizes available up to 24"x48". Allow 2 weeks additional.
The grid in the picture is an 18x24 and the picture does not show the
positioning tabs.
Exceeding Your Expectations
Tel. 636 227-8028
Fax 636 207-8478
PLEASE VISIT OUR NEW WEB SITE
http://www.stl-laser.com
Because of the nature of this prize this is an Opt-In FreeStuff Drawing. Any SMC Member who would like to win Mike's Vector Cutting Grid should post a message in this thread in order to be eligible for the drawing.
We will draw a winner for this prize on Thursday July 27th, 2006. The winner will be announced and will have one week to respond in this thread to claim their prize. Good luck to everyone and thanks to Mike Null for donating this prize.
