Results 1 to 8 of 8

Thread: Could fabric dyes be used on wood?

  1. #1
    Join Date
    Mar 2003
    Location
    Santa Barbara County, CA
    Posts
    499

    Could fabric dyes be used on wood?

    Currently I use Jeff Jewits Transtint dyes and really like them.

    However as I'm thrifty (cheap), I was wondering if fabric dyes would work. I've never heard of this done, but I'm sure it's been tried.

  2. #2
    Join Date
    Feb 2003
    Location
    Shoreline, CT
    Posts
    2,923
    You may get them to color the wood, but it is likely that they will be considerably more light fugative than dyes for furniture. It's just not worth the risk to save $4 on a project on which you have worked many hours.

  3. #3
    Join Date
    Mar 2003
    Location
    Santa Barbara County, CA
    Posts
    499
    Steve,

    I agree with you about not taking a chance for $4 savings, and also wonder about fading. I was just curious if anybody has tried them on wood. They come in just about every color and I think some even come in liquid form. The biggest (and probably only) plus is you can buy them most anywhere, even Wal-Mart stocks them.

    I would think that somebody has had to have tried them out, or knows what their made of.

  4. #4
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,675
    I believe I've seen some turners use them for effect...
    --

    The most expensive tool is the one you buy "cheaply" and often...

  5. #5
    Join Date
    Feb 2003
    Location
    Pairieville, LA
    Posts
    532
    Look at scroll saw segmented work. Rit Dye is used quite a bit. They actually advertise in a scrollsaw magazine. Try finding a scroll specific forum. I bet you will find the info you need.
    What if the light at the end of the tunnel is a train?

  6. #6
    i've had some success with indian inks...these come in a range of colours and do not fade as much as some other dye's.

    to apply i soak a cloth (or preferred applicant) in white spirit, ring out then apply ink as you would a stain or dye - you can get some interesting effects.

    all the best

    dan.

  7. #7
    Join Date
    May 2006
    Location
    Puget Sound area in Washington
    Posts
    353
    It's probably the same stuff. After all, it has to survive the clothes washer and that is with no clear coat, and the sun with no UV inhibitors sprayed on.

  8. #8
    Heck I am sure they would work you could even use food coloring but unless the color wasn't avaible in wood dies I "woodn't" try it.

Similar Threads

  1. Replies: 59
    Last Post: 08-17-2008, 9:54 AM
  2. Turners Glossary...?
    By Stu Ablett in Tokyo Japan in forum Turner's Forum
    Replies: 15
    Last Post: 05-21-2008, 1:39 PM
  3. Turner Interview: Mike Stafford
    By Mark Cothren in forum Member Interviews
    Replies: 32
    Last Post: 03-09-2006, 2:01 AM
  4. Where do you buy your wood?
    By Michael Stafford in forum Turner's Forum
    Replies: 14
    Last Post: 03-05-2006, 9:09 AM
  5. Wood dust and lung cancer association
    By Kurt Voss in forum General Woodworking and Power Tools
    Replies: 2
    Last Post: 05-11-2005, 6:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •