My "shop" consists of a small shop that is used primarily for tool storage and my garage, where I move the tools that I'm using at any given time. I've reviewed the excellent comments, particularly those from Bill Pentz, in several threads about dust collection, but most deal with set-ups that are more than I can accommodate. I have tried hooking a 6 hp shop vac to 2.5" ports on the tools that I have. That works OK on a table saw and router table, but quickly clogs with my big Rikon belt sander. The Clearvue mini-cyclone for use with a shop-vac looks like it might be a good choice to solve this problem. I know I'm not going to capture a lot of the fine dust, but I wear a dust mask and much of my work is actually outside the garage. Anyone have any experience with the Clearvue cyclone for a shop vac or a good solution to dust collection in a shop situation like mine. Thanks!