Results 1 to 10 of 10

Thread: test post (resolved)

  1. #1
    Join Date
    Jun 2005
    Location
    Mountain Home, Arkansas
    Posts
    1,135

    test post (resolved)

    Have I been locked out? Had trouble posting.

  2. #2
    Yer here.
    If you didn't get a memo, you are still good to go


  3. #3
    Join Date
    Apr 2006
    Location
    Near saw dust
    Posts
    980
    sounds like advise from one who may have been locked out in the past- Steve?
    Strive for perfection...Settle for completion

  4. #4
    No. Not yet


  5. #5
    Join Date
    Apr 2006
    Location
    Near saw dust
    Posts
    980
    Didnt know that was possible but I never thought about it. Youve certainly had your chance with all those posts
    Strive for perfection...Settle for completion

  6. #6
    Join Date
    Jun 2005
    Location
    Mountain Home, Arkansas
    Posts
    1,135
    Quote Originally Posted by Steve Clardy
    Yer here.
    If you didn't get a memo, you are still good to go
    What happened was that I tried to send the moderators a note about a very objectionable posting and fake (even more objectionable) name. A message came up that I didn't have permissions to post. Going back, I couldn't even find the thread. So methinks, the whole thing was trashed and I couldn't report something that wasn't there. Just a guess.

  7. #7
    Join Date
    Feb 2003
    Location
    Gloucester, VA
    Posts
    1,996
    Frank,

    I think what happened is that the "Report Post" is actually linked to a post that was moved while you were reporting it.. A timing issue, that once it was moved, you no longer had access to it.
    _Aaron_
    SawmillCreek Administrator

  8. #8
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,845
    Frank, I moved the thread I believe to be in question to the private moderator's forum...it was probably chance timing that you had the issue you did since you don't have access rights there. When I see objectionable material, I don't wait for it to be reported... ...I just boing it to where it can't be seen by anyone outside of other moderators.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  9. #9
    Quote Originally Posted by Jim Becker
    Frank, I moved the thread I believe to be in question to the private moderator's forum...it was probably chance timing that you had the issue you did since you don't have access rights there. When I see objectionable material, I don't wait for it to be reported... ...I just boing it to where it can't be seen by anyone outside of other moderators.


    Sorry. Couldn't resist. I boing a few things too once in a while


  10. #10
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,845
    I was trying to be, umm...light hearted...on the subject since I really couldn't describe what I wanted to say when I saw that thread...TOS violations and all that... 'Side that, with kids, it's about the only time I get to express the idea of such things...
    --

    The most expensive tool is the one you buy "cheaply" and often...

Similar Threads

  1. 1st pic post (I hope!)
    By Jerry Ingraham in forum General Woodworking and Power Tools
    Replies: 22
    Last Post: 09-29-2004, 7:19 PM
  2. Dovetail Jig 95% Finished and Test Run
    By Mac McAtee in forum General Woodworking and Power Tools
    Replies: 9
    Last Post: 04-26-2004, 5:01 PM
  3. post drawing test
    By Larry Browning in forum Forum Tech Support
    Replies: 10
    Last Post: 03-18-2004, 9:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •