Trying to post a drawing - trying again

[Robert Trotter]

Just testing and trying to post a drawing.

Drawing A2 Elevation and Plan v2.dxf

now try again

[Robert Trotter]

here we go again

elev of shed doc test1.1.doc

[Andy Hoyt]

Robert - Not everyone will have AutoCad or even one of the viewers (such as VoloView) on their machines. Converting to a pdf is probably the easiest solution.

[Robert Trotter]

Thanks Andy for the reply.

I don't have the software to convert it to PDF.

I tried clicking on it myself and it wouldn't show either.

But I have worked out that if I cut and paste drawing parts into a word document then it can be accessed. So I suppose I will ahve to do that and try to shrink the file size down so it posts.

Robert

[Robert Trotter]

Here is a go again
shed elev.jpg

OK that was cut and past into a Paint shop file but it pretty small.

I got to go to bed...night

[Jim Becker]

Robert, if you want to post a visible graphic, you'll be best served by using a JPG or GIF file. If the latter, inline is best. See the stickied thread at the top of this support forum for instructions. I find that 600-700 pixels wide max is best for clear display without forcing folks to scroll a window.

[Robert Trotter]

and again
Drawing A2 Elevation and Plan v2.jpg

OK That seemed to work
I worked out that the CAD program I have doesn't save to JPEG ability.
But i forgot how I did it....AHHHHHHHHHHHHHHHH

[Robert Trotter]

I'll try it this way
Walk in tool box Elevation and Plan.jpg