Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: SMC Turner Interview - Cecil Arnold

  1. #1
    Join Date
    Aug 2005
    Location
    Benton Falls, Maine
    Posts
    5,480

    SMC Turner Interview - Cecil Arnold

    Name: Cecil Arnold

    DOB: Older than dirt, October 9, 1942

    Physical description:
    I’m 6’ and about 205 lbs. Blond hair, what of it there is, and green eyes, if you can see them through the glasses. I went to a class reunion about five years ago and all anyone could talk about was how big I had gotten. The last time some of my former chums saw me I weighed all of 120 lbs.

    Where is home?
    I’ve been in Houston most of my adult life. Grew up in a small Central Texas town called Cameron (pop. 5200) which was mostly an oil town. We didn’t have oil wells, but seemed to thrive on gas stations on every corner and I worked at a number of them. Unfortunately I still remember gas wars where regular sold for $.15 a gallon. We tried to move to California in 1990, but it didn’t take for a number of reasons so we came back to hot, humid Houston.

    Pikepole 01.jpg

    Family information:
    After 24 years, wife number 2 (or "The Current Mrs. Arnold" as I occasionally introduce her) is still the best thing to ever happen to me. Taylor is an exceptionally outstanding cook, having participated in the Pillsbury cook off twice, been a semi-finalist in the (Paul) Newman’s Own contest, and brought home some cash in a Pilgrim’s Pride contest. Before she came to Texas, where I managed to latch on to her she, she had an opportunity as third female lead in a low budget movie (1972) called Runaway, in which the “big” name was William Smith—who I’m sure most people have never heard of, and no, it wasn’t that kind of movie. While I’m more of an obsessive/compulsive anti social type, Taylor sees to it that we have some fun, and stop to smell the roses. She spent 35 years in social work and maybe I’m her biggest challenge.

    Do you have a website? Nope.

    Vocation:
    I think I may have retired for the second time, but I can’t be sure, since I still don’t know what I want to be when I grow up. The main things I’ve done to pay the bills, are spending 20 years, 5 months, and one day (but who was counting) with the Houston Fire Department where I retired as a Senior Fire Inspector. That was followed by finally finishing college. I always had problems with doing things in order. After a year or so doing freelance Tech Writing, I managed to land a position with a community college as Director of Fire Protection Technology, which is a fancy name for teaching a bunch of youngsters to become firefighters. Since I was playing in academia I went back to grad school for a Masters. I found both grad school and teaching to be a kick and I had started to miss the brotherhood. After ten years there I decided to retire again. Of course, some of you may know that all firefighters have second jobs, some of mine were: charter pilot; arson investigator/peace officer; aspiring novelist/screenwriter (I did get one screenplay sent to a production company before I parted ways with an agent); and home building.

    Shop Overview:
    When we bought our current house - which I was opposed to - the carrot my wife used was to find one with an expanded garage in which I could have a shop. What we finally ended up with is a two-car garage with a 10’ extension on the rear. I had to wall the extension off, which wound up being 11’ by about 22 ½ ‘ wide. When I built the wall I included a double door for access. Unfortunately I have managed to fill up that small space with too many tools to the point that I really can’t get much work done. I’m currently in the process of re-arraigning the garage so I can locate the DC (have a Clear Vue on order) jointer, planer, Performax 16-32, and air compressor on the 4’ section leading to the shop proper. In the shop I will have my CS (Jet) BS (MM-16) modified Norm router table, and a humongous drill/mill, a 2X6 workbench, miter saw, and the Magic Mustard Machine. I still enjoy flat work occasionally, but it just takes too long. Here’s an old thread about that.

    Tell us about your lathes.
    I started down the slippery slope with a Jet 1442, thinking it would be adequate for some time to come. Boy was I wrong. While I liked the little imitation Mayo thing, it wasn’t long before the Magic Mustard Machine “got in my eye.” I haven’t found anything yet that the PM 3520 can’t do well – it’s much better than the loose nut behind the gouge.

    pikepole 02.jpg

    How do you cope with your Mayo envy?
    I’ve turned on a Wrongway … I mean Oneway, and while it was more than adequate, I found I could get the Mustard and have $1000+ to do other things with, which really made sense to me, but that’s why they make Fords and Chevrolets, isn’t it?

    Tell us about the turning tools you have? Store bought; home made; favorites?

    I’ve got way too many turning tools, I would guess 20 or more; and find I use about 6 regularly. My favorite is the 5/8” PM bowl gouge followed by a ½”, then a couple of scrapers.

    How long have you been turning, and what got you started in the first place?
    You wouldn’t know it from my turnings, but I’ve been beating wood round for about three years now. I started woodworking too many years ago to count, but that was a mostly utility thing using 2X-construction lumber. About 10 years ago I started to get into casework, followed by tables. Flat work just took too long and even though I watched others do turnings it took a while before I got on the slope.

    What's your favorite flavor of ice cream?
    Something regional called Marble Slab Sweet Cream I think, followed by almost anything from Blue Bell.

    What do you enjoy most about turning?
    Finding what’s hiding in the wood and how fast you can go from a blob to something (sometimes) nice.

    What was your first completed turned project? You get bonus points for a picture of it.
    If I had a picture it would be a pile of shavings. My first piece was in a class at The Cutting Edge, a local woodworking retailer, and was a spindle that we practiced doing coves and beads on. Everyone took their work home and I continued to practice on it until there was nothing left.

    What’s your favorite individual piece that you have turned, and why?
    I recently finished a walnut hollow form that was my first completed one. I got the chunk form Ernie Nyvall on a swap and I managed to do a bird’s eye maple collar for it. Except for not getting the shape quite right everything just seemed to come together.
    pikepole 03.jpg

    What’s your favorite form that you turn?
    So far I don’t have a favorite. I’ve done enough bowls that they are becoming easier, but if whatever I’m turning holds together it becomes my current favorite.

    What do you not turn now that you want to - or plan to - in the future?
    I want to try a vase and maybe some lamps.

    How do you take your Moxie? (Straight up? beer chaser? neat? with corn flakes?)
    Moxie is illegal in Texas, just driving through the state with it in your possession is a felony. I can’t believe anyone would touch that nasty stuff.

    What’s your favorite form someone else turns?
    Almost any form that the Flying Curls Gang turns out would qualify as a favorite.

    What’s your favorite individual piece someone else has turned, and why?
    I marvel at anything Travis or Big Mike show. I don’t comment on their work anymore, since I feel like saying something like, “Oh, just another perfect piece from _____”

    What’s your favorite wood to work with and why?
    I’ve only had the opportunity to turn one piece of maple and found it to be a real kick. It was like the curls were attacking me coming off the gouge.

    What brought you to SMC?
    I was looking to upgrade my band saw and in reading some of the web sites found John Shuk’s e-mail address. I sent him a message asking about his experience and in his reply he mentioned that I might be interested in SMC, so it’s all John’s fault.

    Have you met or hung out with any fellow Creekers? Tell us about it.
    I’m fortunate in there are so many creekers in the Houston area. Each one I have met has turned out to be a class act. I got together with Tom Hamilton a couple of times, and Tom Jones once. Met Ernie Nyvall and David Duke for a trip to the last WW show. I think David got frightened that we would make a turner out of him, as I haven’t seen him post lately. And Ernie, being about the best wood bird dog I’ve seen, found some pecan that he, Chris Hartley and I worked on one weekend. Oh yes, I almost forgot, Brad Schmidt and Lloyd Stahl, who I see occasionally at First Monday, which is an event sponsored by The Cutting Edge for GCWA where turners can come in and use the lathes and swap information and lies once a month. Lloyd is a creeker, but I think he lurks most of the time. Here’s a thread about the Cutting Edge.

    What was your first post about? Or don’t you remember?
    First post and thread, I think, was a gloat on receiving my MM 16.

    What's your favorite old thread on SMC?
    I think of all the threads, my favorite is bombing Ken.

    Got any nicknames? How'd you get them?
    Everyone in the fire service gets a nickname, so the one I had dropped off the radar some years ago. Because I was barely heavy enough to get in the fire department (skinny) I got stuck with Pike Pole for a long time—until I outgrew it.

    Now let's get a little deep... If you were a tree, what tree would you be and why?

    That’s an easy one. I would have to be a mesquite. Mesquites are kind of brusque and thorny, but nice inside.

    If you won the Irish Sweepstakes what part of your life would change? I might buy a combo machine, but don’t think I would get to use it much as LOML would insist on buying a place in the South of France.

    pikepole 04.jpg pikepole 05.jpg

    Glad to know you a bit better now, Cecil. Thanks for doing this for us.
    Only the Blue Roads

  2. #2
    Good to get to know you better Cicel. Great interview.

  3. #3
    Great interview Cecil. My pleasure to know you better. I appreciate the compliments. You need to hitch a ride to Mississippi with Ernie next April.

  4. #4
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,675
    Excellent interview, Cecil!
    --

    The most expensive tool is the one you buy "cheaply" and often...

  5. Great interview, Cecil! Hope you can make it with Ernie... would love to meet ya...

  6. #6
    Join Date
    Jan 2005
    Location
    Goodland, Kansas
    Posts
    22,605
    Great interview Cecil. It is nice to know you better.
    Bernie

    Never put off until tomorrow what you can do the day after tomorrow.

    To succeed in life, you need three things: a wishbone, a backbone and a funnybone.



  7. #7
    Join Date
    Feb 2003
    Location
    Conway, Arkansas
    Posts
    13,181
    Nice to know more about ya Cecil. Texas eh? We'll have to meet one of these days. Of course, if you are ever up I-40 in the Conway area, holler at me.
    Thanks & Happy Wood Chips,
    Dennis -
    Get the Benefits of Being an SMC Contributor..!
    ....DEBT is nothing more than yesterday's spending taken from tomorrow's income.

  8. #8
    Join Date
    Aug 2004
    Location
    Dayton, TX
    Posts
    3,173
    Nice to know more about you Cecil.

    Yep, Cecil gave me a nice huge piece of elm and I got a little heavy handed on it. It died in a crack up.

    Hey yea Cecil, I looked it up and it's only 352 miles from here to the BBQ. I thought it would be further.

  9. #9
    Oh man Cecil...nice to know ya better. Everytime I go to the shop...I see a big chunk of "Cecilwood" and wonder when I'll be able to show you something.
    Glenn Clabo
    Michigan

  10. #10
    Join Date
    Jun 2004
    Location
    Houston, Texas
    Posts
    1,578
    Thanks all for the "Howdys."

    Travis I would love to catch a ride with Ernie, but unfortunately LOML already has plans for a long vacation starting next April (how's that for advanced planning).

    Ernie, I still have some of that Elm left if you want to take another try at it.

    Glenn I though you would have that Mesquite either turned or used for BBQ by now.
    Good, Fast, Cheap--Pick two.

  11. #11
    Join Date
    Jul 2005
    Location
    East of the Mississippi
    Posts
    3,807
    Cecil, its nice to know you better. Great interview !! You just need to be careful around that Ernie guy, I hear he is dangerous
    941.44 miles South of Steve Schlumph

    TURN SAFE

  12. #12
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    28,504
    Nice to know more about you Cecil! Great interview!
    Ken

    So much to learn, so little time.....

  13. #13
    Great interview Cecil! 15 cent gas, man you must be older than dirt. I only go back to the 20 cent days.

  14. #14
    Join Date
    Feb 2006
    Location
    Bedford County, Virginia
    Posts
    2,325
    Enjoyed the interview, Cecil. Thanks for sharing.

    Mark

  15. #15
    A great interview, Cecil. Good to know you a bit better. By the way, I admit to remembering 15 cent gas....

    Jerry

Similar Threads

  1. SMC Turner Interview - Karl Laustrup
    By Andy Hoyt in forum Member Interviews
    Replies: 24
    Last Post: 10-08-2006, 1:10 PM
  2. Turner Interview: Reed Gray
    By Mark Cothren in forum Member Interviews
    Replies: 22
    Last Post: 07-05-2006, 8:17 PM
  3. Turner Interview - Steve Ash
    By Mark Cothren in forum Member Interviews
    Replies: 39
    Last Post: 06-16-2006, 1:20 PM
  4. Turner Interview: Keith Burns
    By Mark Cothren in forum Member Interviews
    Replies: 29
    Last Post: 04-01-2006, 2:22 AM
  5. Neander Interview: Alan Turner
    By Zahid Naqvi in forum Member Interviews
    Replies: 18
    Last Post: 02-22-2006, 8:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •