Incra 5000 vs. Jointech SmartMiter

[Rob Bodenschatz]

I'm considering these two. Any feedback on one vs. the other? I know each of these tools have been discussed before but I wouldn't mind hearing some fresh opinions.

[JayStPeter]

I went to a show and compared them at the demo booths hands-on. I chose the Jointech although I wouldn't hesitate to own the Incra. I have an Incra 1000se miter gauge and like it.
There are a few things that sold me on the Jointech. First, I preferred the fine adjust for the stop on the Jointech. Second, the scale remains accurate with angle cuts. The Incra must be readjusted (not that big of a deal really). Finally, and probably most importantly, I just preferred the feel of the Jointech.

[RichMagnone]

I went through a similar decision almost 2 years ago and came up with the Jointech. I too like the fact that the distance stays correct regardless of angle. I would add into your thought process the jess em sliding miter. I didn't think it was a consideration when I purchased but at this point, I might have liked that better for the ease and convenience of having it "on" at all times and not having to deal with slop or play in the miter grooves on my saw.

[Jim O'Dell]

Smart Miter at my house too. I bought mine 3 years ago. After the move, the first cut cut into the plastic end a little, so it must have gotten bumped in the moving process. I talked to the JoinTech guy last year at the WW show, he said send it in, let them go through it and get it back in specs. Only charge is the shipping there. Now that's taking care of your customers! And I love how it works. Jim.

[Terry Flowers]

My customer service experience was exactly the opposite. I called Jointech ablut a problem with my sled, and they refused to make good on it. I have also heard customer service complaints about jointech in other threads. I don'r like to unfairly degrade a company, but knowing that others have had a similar experience, I now take every opportunity to publically express my displeasure with Jointech.

That said, the Smart Miter itself, as it has evolved since I got mine (one of the very early ones), seems to be a good product, judging by the responses here.

Terry

[John Miliunas]

Another Jointech owner of @ 2 years. Anytime an absolutely accurate cut is necessary, it goes on the TS. 'Nuf said. (Can't speak of their CS, as I've not had to contact them.)

[Chuck Nickerson]

But I'm also a happy Jointech user. I actually bought a second Jointech and modified it for handling bevel cuts.

[Chris Livingston]

Love my Smart Miter. It came with the right side piece for cut offs and I've been very very very happy with it compared to my Incra 5000 which I kept having to re-adjust every frickin time I bumped the long miter arm sticking out past the side of the saw.

[Stuart Johnson]

Another vote for the Jointech. My main use is to cut segements for turnings and find it very accurate. I have not tried the Inca.

[Bob Reeve]

Another vote for the Jointech though I have not used the other. I have had it for three years and use it often.

[Rob Bodenschatz]

Wow, is the decision that easy? No votes for the Incra?

Rich, I've been looking at the Jessem sliding table for a while but I just can't bring myself to make those modifications to my brand new PM2000 fence.

[David Giles]

Another Jointech vote from a newbie. Solid piece of equipment and it doesn't go out of square easily. Get the hold down clamp if you go this way. It lets you safely crosscut short pieces. I've crosscut up to 16" wide panels. Between the Jointech and an EZ rail with square, I haven't found the need to make a crosscut sled yet.

[Halsey MCCombs]

Another vote for Jointech.had one for couple years and am very happy with it. Halsey

[Matt Robinette]

I have the Incra 5000 it is a great tool. But If the Jessem sliding table was available at the time I would have bought it. The 5000 is a great miter but not so hot on the sled part.

[Joe Spear]

I've had the Smartmiter for three years. Even though it's been banged around, it has held square. I like the fact that when you adjust it to cut an angle other than 90 degrees, you don't have to move the fence back and forth. I also have a couple of Incra 1000's and like them very much. But I have sliced some aluminum off the fences several times when I forgot to make the length adjustment when cutting 45's. I also have an Incra fence on my table saw and one on my router table. For accuracy they can't be beat. The Incra 5000 sounds very good, but I think I'd get a Jessem slider before I would get the Incra.