Unifence Jig Kwestion

[Gary Groves]

I have a Delta contractor TS with a Unifence.

I'm wanting to build some TS jigs, and most of them reference using a Bies. (or similar) fence. the Unifence is not structured to allow for easily attaching jigs.

Does anyone have pictures of jigs with the unifence?

[David Schoemaker]

Cheated and got the replacement fence from Peachtree. It has lots of T Slots in it for jig attachment.

Dave

[Hoa Dinh]

You can get the Uni-T-Fence. But I myself have never found the need for it. Read this article.

[Jim Becker]

I did build a tenoning jig that ran on the UniFence years ago when I had one (miss it...), but don't have any pictures. It was somewhat challenging. "Today", I'd buy the Uni-T-Fence that Hoa mentions for use when jigging is necessary. Given the design of the UniFence, it's quick and easy to change between the original and the alternative fence.