These are what got me started in wood turning in the first place, but with learning to turn bowls, hollow forms, boxes and all of that other "cool" stuff, I'd gotten away from these plugs. I have some orders for five horns to get done by Christmas, so I buckled down to the task. Even after the horns are finished, I still have the engraving to do, which takes most of the time. Here are some pictures of the plugs I'm turning, both for the large end and for the smaller spout. I'm trying to learn how to thread the spout end to make the "York County" horns with a screw off tip, but so far haven't had much luck with my "technique". I'll figure it out eventually, though. I've even talked to Keith about seeing how laser engraving does on a powder horn. Thanks for looking, have fun and be safe.