Well Santa Wife was good this year. Not a bad haul, need to get out to the workshop and make something to re-enforce this positive behavior.
Well Santa Wife was good this year. Not a bad haul, need to get out to the workshop and make something to re-enforce this positive behavior.
Paul,
Nice Christmas haul. That is a really nice looking router set-up. Is that table cast iron? I think I could really get into that.
Gary K.
Very kewel...
So...what is that third item?
--
The most expensive tool is the one you buy "cheaply" and often...
Paul,
Remember when you "make something to re-enforce this positive behavior", it can't be something for the workshop.
Nice haul. I love the router table. I'll be interested in hearing how well you like it. That's something that is still on my "dream list." For now I have to use a small bench top table.
I got truck parts and music dvds. I did get a great gift from the secret Santa network....a pen turned from composite, a Tenryu saw blade, the first year of Woodcraft magazines and a windbreaker jacket!
Good, I'm not the only one who doesn't know! So Paul, what izit? Don't keep us in the dark or whe'll have to come after you!! Jim.Originally Posted by Jim Becker
Coolmeadow Setters...Exclusively Irish! When Irish Eyes are smiling....They're usually up to something!!
Home of Irish Setter Rescue of North Texas.
No, I'm not an electrician. Any information I share is purely what I would do myself. If in doubt, hire an electrician!
Member of the G0691 fan club!
At a minimum, I'm Pentatoxic...Most likely I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, s3.
Sharpening jig.Originally Posted by Jim Becker
Cheers,
John K. Miliunas
Cannot find REALITY.SYS. Universe halted.
60 grit is a turning tool, ain't it?
SMC is totally supported by volunteers and your generosity! Please help if you can!
Looking for something for nothing? Check here!
Mrs. Klaus and Ms. Klaus Jr.'s were good to me this year. Some of my (their ) favorite cologne, shirts that I don't "swim" in (dramatic weight loss over last year), a couple wooden dumbbells (antiques from the UW Madison, Red Gym), a couple antique planes (one woodie, one transitional), an old level w/wooden case. Oh, and then there was the pretty "substantial" gift card for my favorite toy store (Woodcraft). Musta' done something right this last year!
Cheers,
John K. Miliunas
Cannot find REALITY.SYS. Universe halted.
60 grit is a turning tool, ain't it?
SMC is totally supported by volunteers and your generosity! Please help if you can!
Looking for something for nothing? Check here!
Yep, it's the Bend Dog pro. Really nice cast iron surface.Originally Posted by Gary Keedwell
Thats the Krell sharpening guide. I am hoping it will work well for narrow western chisels and Japanese chisels which tend to be short bodids and wont fit most jigs.Originally Posted by Jim Becker
I agree, plan on making bathroom cabinets.Originally Posted by Kris Ingmanson
I'll give an update on how well it works after I get it fired up.Originally Posted by Don Bullock
Woodcrafters is one of my favorite stores. Any ideas on what youll get with that gift certificate at woodcrafters John?Originally Posted by John Miliunas