Pot Filler Faucet

[Byron Trantham]

Anyone out there have any experience with pot filler facuets? I want to install one for SWMBO abd I was shocked at how much they cost $300-$700! I found a bar sink single line (cold water only) for about $100. What is the diffeence between these two designs? I suspect the pot filler valves all more water to move than a conventional faucet. Any help on this subject?

Thanks in advance and have a Merry Christmas.

[Tyler Howell]

Your paying for the latest trend!!!!
If it will pass inspection bye SWMBO, I'd go got it.
I use copper rather than PVC around the heat of the stove.

[Ken Garlock]

Hi Byron.

Take a look at www.faucets.com. I have bought from them and had no problems.

[skip coyne]

wow I dont know why there so much I found these at overstock , might want to look at them

http://www.overstock.com/?page=profr...d=2147535&AK=1

[Jim Becker]

I wish I would have put one in when I did our kitchen...but alas, I didn't. They are quite pricy, but also quite tricky to construct due to the articulation. There is a lot more brass in them than a regular faucet, too...just due to the size.