Results 1 to 14 of 14

Thread: My 2nd HF – Unique Shape

  1. #1

    My 2nd HF – Unique Shape

    Spalted birch, 3 5/8” high x 4 1/2” wide x less than 1/8” thick, opening is 1 ½”, foot is 2 ½”. Finish is 2 coats of Watco Natural, several coats of Minwax Wipe-On Poly, Beall buffed.
    HF2 Profile.jpg HF2 Side.jpg HF2 Top.jpg HF2 Finial.jpg
    Form is a little unorthodox but wanted to make a HF that was different from anything else I have seen. The finial is cherry and not sure if it adds to or subtracts from the overall effect.

    So, what are your thoughts about the form? Should I ditch the finial or make another with a different shape?

    Any suggestions for a name?

    As always, your comments/suggestions are more than welcome.

    Thanks for looking.
    Steve

    “You never know what you got til it's gone!”
    Please don’t let that happen!
    Become a financial Contributor today!

  2. #2
    Join Date
    Feb 2006
    Location
    Oak Lawn, IL
    Posts
    243

    Daniel Heine

    Steve,

    Looks gorgeous to me!!!! I've turned a couple of bowls with some success, but someday I want to move up to the hollow forms. I hope I can turn one like this one day!!! Very Nice!!!

    Dan Heine

  3. #3
    Join Date
    May 2006
    Location
    Roanoke Virginia
    Posts
    2,692
    Blog Entries
    2
    Steve a very nice form and beatuiful wood. I split on the finial I like it but am wondering what a darker wood would do for it.
    Tom

    Turning comes easy to some folks .... wish I was one of them

    and only 958 miles SE of Steve Schlumpf

  4. #4
    Join Date
    Jan 2005
    Location
    Goodland, Kansas
    Posts
    22,603
    Steve I like it. It is beautiful. The form and finish are excellent. I am still up in the air about the final. If it were mine I would ditch it. Just my humble opinion.
    Bernie

    Never put off until tomorrow what you can do the day after tomorrow.

    To succeed in life, you need three things: a wishbone, a backbone and a funnybone.



  5. #5
    Join Date
    May 2006
    Location
    Hamilton, NY
    Posts
    207
    ok here goes:
    I love the finish!
    I think that a slightly smaller foot would fit the form a little better. I also feel that the finial doesnt quite match the form.... but not sure what type of finial would look better... maybe one that flows more with the piece... follow the contours of the HF into the lid as opposed to having the sharp contrast? that might work a little better. oh and like tom a contrasting color might do it a little more justice....
    Just my opinions... I know i cant turn anything like that... but i can critique it ha ha... yeah just my opinions and nothing more.
    Ben
    You can only be young once, but you can be immature indefinitely.

    Firefox2 <–––– I'm not connected, just really like it, better than any other web browser I've tried

  6. #6
    Join Date
    Feb 2006
    Location
    Bedford County, Virginia
    Posts
    2,325
    Steve,
    There's a lot I like about this! It's unique, balanced, well finished, and a good display of some excellent wood. The lid/finial looks out of place to me. I like the idea of having one, but I think ebony would be a far better choice. I'm kinda on the fence about padauk or bloodwood...they might work but ebony would be my first choice. Also, a smaller finial would look better.

    The other thing I would suggest, if/when you do another form similar to this, is to create more of a downward slope from the top down to the outtermost circumference. Not quite as flat. You do have a slope...I'd just suggest more of one.

    To be so new to doing HFs, you're doing one heck of a good job! Way to go!
    Last edited by Mark Pruitt; 01-22-2007 at 3:56 PM.

  7. #7
    I must have it.
    ~john
    "There's nothing wrong with Quiet" ` Jeremiah Johnson

    I live in Steve Schlumpf's basement...under the stairs

  8. #8
    This one definitely says "Don't sit on me"!

    I'm with Mark on this one. For a 2nd hollow form this is great! I do think a dark wood for the finial would suit it better.

    That wood is gorgeous. I actually like the bowl design. It's unique. You might consider not drilling into the base on the next one. Just make a shallow bowl out of the upper portion and leave the rest to serve as a pedestal.

    Very cool!

  9. #9
    Join Date
    Dec 2006
    Location
    Fort Worth, TX
    Posts
    236
    I think you did a fine job. I agree the finial might look better in a darker wood, maybe a little smaller. But i would put that on my mantle as is so everyone would see it.
    John

    "It's only when you look at an ant through a magnifying glass on a sunny day
    that you realize how often they burst into flames."

  10. #10
    Join Date
    Jul 2005
    Location
    East of the Mississippi
    Posts
    3,807
    Steve, I really like it when someone discounts the "rules". I like the form with one small exception and that is I think the top should have a little more curve to it. I like the idea of the lid with finial but think it should be thinner and a curve on the lid. Anyway this is all "my opinion" so you should take it with a grain of salt. The most important thing is if you like it, thats what matters.
    941.44 miles South of Steve Schlumph

    TURN SAFE

  11. #11
    Join Date
    Apr 2004
    Location
    Marquette Heights, Illinois
    Posts
    2,945
    That is SWEET, Steve.

    Bruce
    "The great thing about Wood Turning is that all you have to do is remove what's not needed to have something beautiful. Nature does tha Hard work."

    M.H. Woodturning, Etc.
    Peoria, Illinois 61554

  12. #12
    I really like the wood and the finish. The form reminds me of a water tower. I don't care for the finial, I think it is too dull and detracts from the vessel wood.
    Jim

  13. #13
    Join Date
    Apr 2006
    Location
    Camas, Washington
    Posts
    1,097
    I like it ... it really is a unique shape... your wood selection is great. About the finial: if it were me I would remake it using a darker wood and make it longer and thinner and more delicate. Just my .02. I really do think that it is a gorgeous piece though!!!
    Isaiah 55:6-7

  14. #14
    I REALLY like the form and the wood and the finish. I saw that and just assumed you were an old pro at these hollow forms, but I hear you are fairly new to it. I think a lid that was flat with the top would be better since there is a very flat top area, with a bulging lid. Also ebony or dyed walnut would be better wood choices, and a thinner finial. It looks really really nice without the lid as it is, so don't sweat putting a new lid on, just use it for a future vessel and leave this one lidless. I just looked at it again, and I love the finish.
    "Irresponsibility-
    No single raindrop believes it is to blame for the flood." - despair.com

Similar Threads

  1. A few new unique pens including cactus.
    By Curtis O. Seebeck in forum Turner's Forum
    Replies: 13
    Last Post: 11-24-2006, 1:16 PM
  2. Router Bit Search - Pear Shape??
    By Glen Blanchard in forum General Woodworking and Power Tools
    Replies: 5
    Last Post: 10-15-2006, 2:54 PM
  3. need egg shape
    By Ian Malings in forum Engravers Forum
    Replies: 4
    Last Post: 04-05-2006, 7:45 PM
  4. How do you shape a chair seat?
    By Dennis McDonaugh in forum Neanderthal Haven
    Replies: 24
    Last Post: 03-27-2005, 11:00 PM
  5. Which Oval Shape Do You Like?
    By Todd Burch in forum Design Forum
    Replies: 45
    Last Post: 01-24-2004, 9:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •