Spalted birch, 3 5/8” high x 4 1/2” wide x less than 1/8” thick, opening is 1 ½”, foot is 2 ½”. Finish is 2 coats of Watco Natural, several coats of Minwax Wipe-On Poly, Beall buffed.
HF2 Profile.jpg HF2 Side.jpg HF2 Top.jpg HF2 Finial.jpg
Form is a little unorthodox but wanted to make a HF that was different from anything else I have seen. The finial is cherry and not sure if it adds to or subtracts from the overall effect.

So, what are your thoughts about the form? Should I ditch the finial or make another with a different shape?

Any suggestions for a name?

As always, your comments/suggestions are more than welcome.

Thanks for looking.