Wow, I'd like to be let loose in that place.
Wow, I'd like to be let loose in that place.
Be even more fun to run loose in that place with Jim's credit card and not mine.Originally Posted by rodney mitchell
Don
nice pile of lumber. cherry crotch ... I have tried several times to dry it , only to be disappointed. best wishes in the search
Lou
Yes, that was the issue. The boule we looked at out in the sawmill building had some of the very nice feathering I wanted, but aside from having to buy from the outside in to the slices I wanted, there was too much cracking. Rick Hearne indicated that cherry was tough just due to the way the crotches are so inconsistant. Walnut crotch is a dream to dry in comparison and I would have opted for it but for it being darker than I wanted for this project. I also looked at some nice mahogany and bubinga crotch and could have made that work, too...but at $25 a foot and having to buy into the boule as described above, it just wasn't going to happen. So...the vanity door panels will be some nice QS English Sycamore (I cut and book-matched the stock today) and I'll use the one crotch I was able to score for a smaller cabinet elsewhere.Originally Posted by lou sansone
--
The most expensive tool is the one you buy "cheaply" and often...
Jim,
Next time you go let me know. That ambrosia maple is to dye for. Nice haul!
Dave
Pick you color...Originally Posted by Dave Malen
--
The most expensive tool is the one you buy "cheaply" and often...
I thought I edited that
Dave
Yeah, she was surprised and did like it. Surprised because my son really hasn't spent that much time (read that none) in the shop, so was no expected to be giving something like that.Originally Posted by Pete Brown
There's one in every crowd......and it's usually me!
I typically don't care much for Oak, but that piece you have there is very nice. I've never played with English Brown Oak; does it work like domestic oaks?Originally Posted by Jim Becker
Pete
I don't know how it works, Pete. It's pretty coarse grained, but the color is outstanding. I believe it's a "white oak", but could be wrong about that. No matter...I bought it 'cause it just really caught my eye and it was easy to envision "the project". Not inexpensive, however. The 4/4 is $12 per and the 8/4 is $15 per.Originally Posted by Pete Brown
--
The most expensive tool is the one you buy "cheaply" and often...
I have worked Eng. brown oak. It is a bit chippy, but beautiful. Some burls are not uncommon. Pretty expensive wood, but great color and grain.
Alan Turner
Philadelphia Furniture Workshop
That's a nice haul of wood Jim. I sure wish we had a place like Hearne near Los Angeles. I guess that's the price we have to pay for living somewhere with good weather most of the time.
Don, we have good weather here all the time, too. The only difference is that sometimes it's good for "me", sometimes it's good for frogs, sometimes it's good for people who repair heating systems and sometimes...well, you know what I mean...
--
The most expensive tool is the one you buy "cheaply" and often...
Thanks for the road trip Jim, I'm still drooling.
By the way my wife and and two of my daughters were in Pittsburg over the weekend were they anywhere near you or Hearne on their way there Via the turnpike from Ohio. If they were they could have dropped me off
I bet I drove right by while you were there. I had to go down to the bay to help my Dad take the cover off his boat & put the canvas top on. Drove right past Hearnes at about 8 AM & on the way back at around Noon. If I'd of known I would have stopped in to help you spend some of your money
I don't go to Hearnes very often, even though they're 20 minutes from my house, because I love my Wife & would hate to have her divorce me over the AMEX bill when I finished shopping at the candy store. One time I was there & they had a bunch of $100 BF stuff in the showroom - YIKES! I haven't been there since they installed that giant sawmill. Is it up & running?
Last edited by Tom Sweeney; 04-02-2007 at 12:01 AM.
God Bless America!
Tom Sweeney BP