[OP]
Member
UPS man showed up today with this. It was supposed to be a 1014 I. All the box and paperwork says 1014 I. It looks like a 1014 VS to me. VS box was messed up a little in transit but I am going to call Jet and see about getting a new box. It still works great. I do have a question about the live center in the tailstock. Does it come out?? If so how do you get it out?
Last edited by Bobby Perry; 07-03-2007 at 6:06 PM.
Contributor
Bobby Congrats on the lathe! I've got it's twin and it works well. To get the live center out of the tail stock, unlock the quill lock ...just a little say 1/4 turn and then turn the handle counter clockwise until the live center pops out!
Enjoy the new toy!
Ken
So much to learn, so little time.....
Member
Or you can tap it out like the spur center of the headstock using the knock out tool. Godspeed.
Be carefull, it's like a drug. Next thing you know you're looking at trees like a hot girl.
What you listen to is your business....what you hear is ours.
Contributor
Congrats on the lathe Bobby. Now you went and did it. Fell into the black hole of turning.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Member
And it for sure is a VS model. That is the little black box hanging off the left side. Good luck and happy turning!
In Memoriam
Congrats Bobby !!!!
941.44 miles South of Steve Schlumph
TURN SAFE
Member
Congratulations Bobby, now the fun begins.
[SIGPIC][/SIGPIC]Tom
Turning comes easy to some folks .... wish I was one of them
and only 958 miles SE of Steve Schlumpf
Moderator
Congrats on your new lathe! Looking forward to seeing some turnings! Remember - lots of pictures please!
Steve
“You never know what you got til it's gone!”
Please don’t let that happen!
Become a financial Contributor today!
Member
Nice one Bobby!
Posting Permissions
Reply With Quote
