I have a dilemma, See these three pics.The blue cardboard is the leg that will be 3/4 thick which makes it flush with the draws and eventual doors.
What I didnt think about was how exactly doors were going to mount. I have a regular old hinge but that wont work since the door face overlaps the frame on all 4 sides.
In this pic the cardboard is moved over to the right and not flush againts draw sides which is what I wanted originally.I have about 1.25 inches on the right of draws with the cardboard moved over.I looked at my kitchen cabinets and theres a hinge that goes over edge and front face and to outside edge where theres pin.It sitcks out 1.25 inches from inside edge.
Should I try a euro hinge for this? If so how far out will the euro hinge make the door stick out further than flush? If anyone has advice on a hinge that will work could they give suggestions of a particular brand name? I need to be able to get it at rockler or woodcraft in person, soon.
Thank you Maple dresser hinge 001.jpg
Maple dresser hinge 002.jpg
Maple dresser hinge 003.jpg