Page 1 of 2 12 LastLast
Results 1 to 15 of 28

Thread: SMC Turner Interview - Robert McGowen

  1. #1
    Join Date
    Aug 2005
    Location
    Benton Falls, Maine
    Posts
    5,481
    Blog Entries
    1

    SMC Turner Interview - Robert McGowen

    Name: Robert McGowen

    How young are you?
    3 years shy of a half century. Dang, that sounds old.

    Physical description:

    6 feet even, bald as you can get, and between 185 and 225 pounds depending on what sort of diet I am trying, currently 205.

    Where’s home?
    I live in Texas and have been here almost my entire life. I was born in Tennessee if that gives me any sort of bonus points though.

    Not a chance, bub.

    Family information:

    I have been happily married for 25 years now to the same person that I took to my high school prom. We have 4 wonderful kids: Our oldest son who is 23 years old, a 19 year old daughter, and twin boys that are 16 years old. The oldest two are in college (one courtesy of the United States Air Force!) and the twins have been home-schooled their entire lives. I am proud to say that we are all Christians and are active in our church. As for pets, we had over a hundred parrots at one time, but now just have one parrot, 5 dogs, some chickens, and a 7000-gallon pond full of koi and goldfish. Oh yeah, if it swims the 3 boys and I will fish for it.

    Daddysarge 01.jpg Daddysarge 02.jpg

    Daddysarge 03.jpg Daddysarge 04.jpg

    Do you have a website?
    I actually have a business that I run on the side but the only things on it made out of wood are parrot boxes I made using plywood. Even though it helps with the bills, I now have an intense dislike for plywood!

    Sheesh! A page break already!
    Only the Blue Roads

  2. #2
    Join Date
    Aug 2005
    Location
    Benton Falls, Maine
    Posts
    5,481
    Blog Entries
    1
    Vocation:
    I am a sergeant in a large city police department in Texas and have been there almost 26 years. It seems like I was just a young child when I started there, and I haven’t done anything else. I have worked narcotics the last 7 years, and about 80% of what I do can be rather boring, like sitting in a car for 8 hours at a time doing surveillance. The other 20% I would PAY THEM to get to do, but please don’t tell anyone that! Plus, there is something to be said about a job where you wear shorts, sandals, and a Harley T-shirt for work clothes. I included a couple of professionally altered photographs so you could see me in action. I’m the guy on the left if you can’t tell.

    daddysarge 05.jpg Daddysarge 06.jpg

    Your resemblance to Keith Burns is uncanny. You guys related?

    Shop Overview:
    I built a 16’ x 36’ building to house the 100+ parrots. I eventually concreted it in a section at a time and now it is THE SHOP. It is right behind the house, and is capable of being enlarged, and is looking rather cramped right now. I started woodworking as a necessity building breeding boxes for the parrots. One thing led to another, as it often does, and the parrots are now gone due to the breeding box business taking up my time. I currently have a Jet 10” cabinet saw, Jet dust collector, Jet 6” jointer, Rigid 12” planer (I have no idea why?), Jet 14” bandsaw, Rigid floor drill, Delta table top drill, Jet 12” disc sander, Jet 10-20 drum sander, Makita 12” compound sliding miter saw, more clamps than you can imagine, and a wide assortment of hand tools. I will never be a Neander. If the electricity goes out, my shop is useless. I like making cutting boards also, but with the turning sickness, I cut the corners off of the last board and turned it round!

    How many lathes do you own?
    I have a Jet mini (of course) and recently purchased a Jet 1220. My wife told me that I could buy a Powermatic 3520b with any accessories that I wanted the day I retire. I am planning to retire at the end of this year, but I think she is trying to make sure of it.

    Why Wait? For retirement, that is. Oops, you said, m*st*rd – take your time.


    How many turning tools do you have?
    I counted 15 turning tools including one homemade one. I could not bring myself to pay $35 for a tool specifically to make captive rings. I sharpened the tip of a long, thin screwdriver and bent it over about 60 degrees. It looks like a very thin and bent parting tool. It worked great and I thought I was the smartest guy in the world. It can also open paint cans, be used as a knockout bar, or used to mix epoxy. It’s an all-around workhorse, but I end up using a round-nose scraper for about 80% of my lathe work though. I couldn’t turn without it.

    How long have you been turning, and what got you started in the first place?

    I am in the “woodworking” business, so I get to write off tools on my taxes and I needed some parrot perches. A lathe? Sure, why not. I did the standard “take a pen making class at Woodcraft”, got hooked, and that was that. If you are reading this, then you know what I mean! It has been about 4 years now, but the desire is stronger than ever.

    What's your favorite flavor of ice cream?

    No contest – Blue Bell Great Divide. It’s half homemade vanilla and half dutch chocolate, all in the same carton. The best of both worlds.

    Sounds good – I’ll swap ya for some Moxie.

    What do you enjoy most about turning?
    I am really into segmented turning now. It is great when people look at a piece and the first thing they say is, “How did you do that?” But the actual turning part? When you have the perfect speed, the perfect tool, the perfect wood, and you look over your shoulder and see a stream of paper-thin wood flying several feet past your shoulder, you know life is good.

    What do you enjoy the least about turning?
    Cleaning up that stream of paper-thin shavings that you just saw when you looked over your shoulder! I still have not figured out how you can get so much mess from a small piece of wood.

    What was your first completed turned project? You get bonus points for a picture of it.
    The first project was the pen at Woodcraft. It was entirely messed up. I did not quite understand the concept and ended up with a pen with a giant depression in the middle of each piece. It was made of Rosewood and was awful. I loved it anyway. Bonus points: zero. Why would I want to show a picture of it? I have enough pain in my life.
    Only the Blue Roads

  3. #3
    Join Date
    Aug 2005
    Location
    Benton Falls, Maine
    Posts
    5,481
    Blog Entries
    1
    Oh, and what's up with that now AWOL antique avatar photo of yours?
    The photo is not really that old. It was always kind of funny to hear my kids explain to their friends why Dad has earrings and an 8” goatee. And the look on the Moms’ faces when they grabbed their little kids’ hands in the grocery store when I walked by always made me smile. If they only knew that I am a really nice guy and the first person they would want around in an emergency. Oh well………….

    daddysarge 07.jpg

    What’s your favorite individual piece that you have turned, and why?
    It would have to be the inside-out turning that I made my wife for Christmas. It is a lamp that has a cross design in it. It isn’t the hardest thing I have turned, but I knew that it would mean a lot to her. All the effort was rewarded by the smile on her face and the sparkle in her eyes when she saw it.

    What’s your favorite form that you turn?
    I like doing segmented pieces. It was always a challenge to take a raw piece of wood and make it do want I wanted it to do, but most of the time, the wood would end up doing what IT wanted to do! With segmented work, I at least have some sort of control over what I am trying to accomplish. My wife says I am all about control!

    What do you not turn now that you want to - or plan to - in the future?
    I want to do something artistic. A small hollow form with a long thin base and really nice finial comes to mind.

    How do you take your Moxie? (Straight up? beer chaser? neat? with corn flakes?)

    Straight from the can, but being from Texas, I have never even seen any! (Yes, I actually know what it is.)

    Like I said, we can fix that.

    What’s your favorite form someone else turns?
    This really isn’t a form, but I like the artistic pieces. Most turners can produce some really nice stuff, but only a few people can make you say “Wow!” when you see their pieces. I still aspire to do this.

    What’s your favorite individual piece someone else has turned, and why?
    It is this one:

    That Stinson guy must have a 12 HP buffer the way his stuff shines.

    What’s your favorite wood to work with and why? It would have to be mesquite.
    I like the way you can go straight from a tree to a finished piece all in the same day.

    What brought you to SMC?

    I was trying to improve my skills. I joined the day I found the website and have never found an equal to it.

    What was your seventh post about? Or don’t you remember?
    Probably some pithy witticism intended to showcase my intellect and astute powers of observation as well as my ability to change horses in midstream.

    Do you recall the first thread you started?
    Without cheating? No clue, but I am sure it was super intelligent

    Intelligence must be a lonely thing.

    What’s your favorite old thread on SMC?
    Anything involving DNA and green wood. My personal feeling is that DNA really……... oh never mind.

    Link deleted in advance.

    Have you met or hung out with any fellow Creekers?
    Tell us about it. Just recently, I got a chance to meet some Creekers in Houston at a bar-b-que. I must have really wanted to go because it was a three-and-a-half hour drive each way. I learned a couple of things and made some new friends. I would do it again for sure. (Thanks again for the great time Creeker guys!)

    Got any nicknames? How'd you get them?
    I answer to Sarge or Dad, depending on where I am. Easy to guess where they came from.

    Now let's get a little deep... If you were a turning tool, what tool would you be and why?
    I would say a skew. Everyone is a little scared when they first meet you, but after a while, they realize you are okay.

    If you won the Tri-State Megabucks what part of your life would change?
    I would give 10% to the church, buy my wife the string of completely unnecessary pearls that I have always wanted her to have, trade in whatever lathe I have for some mayo, and try to stay the same. I really have it pretty good!

    Here’s some more of Daddysarge’s stuff.

    Daddysarge 08.JPG Daddysarge 09.JPG daddysarge 10.jpg

    Thanks for doing this Robert. Been a pleasure, and I’m happy to know the streets of Moxieville, Texas are safe tonight.
    Last edited by Andy Hoyt; 07-28-2007 at 7:43 PM.
    Only the Blue Roads

  4. #4
    great interview!

  5. #5
    Join Date
    Jan 2005
    Location
    Goodland, Kansas
    Posts
    22,603
    Robert great interview. It is a pleasure to know you better.
    Bernie

    Never put off until tomorrow what you can do the day after tomorrow.

    To succeed in life, you need three things: a wishbone, a backbone and a funnybone.



  6. #6
    Join Date
    Sep 2003
    Location
    Douglasville, GA
    Posts
    776
    Hi Robert:

    Great interview! I enjoyed reading it nearly as much a visiting with you at the Houston BBQ last month.

    By the way, did you see the 3520 on CL in your neighboorhood? It's an A but priced right.


    Best regards, Tom
    Chapel Hills Turning Studio
    Douglasville, GA

    Hoosier by birth, Georgian by choice!

    Have blanks, will trade.

  7. #7
    Join Date
    Aug 2006
    Location
    Rio Rancho, NM
    Posts
    2,564
    Quote Originally Posted by Andy Hoyt View Post
    Where’s home?
    I live in Texas and have been here almost my entire life. I was born in Tennessee if that gives me any sort of bonus points though.
    Robert, the bonus points you earned by being born in Tennessee were totally negated times two when you moved to Texas!!!

    Nice interview. I enjoy seeing your work.

    Nancy
    Nancy Laird
    Owner - D&N Specialties, Rio Rancho, New Mexico
    Woodworker, turner, laser engraver; RETIRED!
    Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
    SMC is user supported. http://www.sawmillcreek.org/donate.php
    ___________________________
    It's nice to be important, but it's more important to be nice.

  8. #8
    Join Date
    Dec 2004
    Location
    St. Louis
    Posts
    3,287
    Great interview, Robert.

    Quick question though. I assume it must be a really small town.

    Why do all those Texas cops look alike?
    Where did I put that tape measure...

  9. #9
    Facinating interview, Robert. I guess you really are nicer than you look.

  10. #10
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    37,497
    Robert....good to know you better!! And I'm also a fan of "business casual" for work...
    “Never raise your hands to your children, it leaves your groin unprotected.” - Red Buttons

    If you want your spouse to listen and pay strict attention to every word you say -- talk in your sleep...

    Be safety conscious. 80% of people are caused by accidents.

    Equestrian Sports. The most fun you can have with your boots still on...


  11. #11
    Great interview Robert! I'm probably one of those people that had you pictured as a pretty scary dude. Nice to know you're such a nice guy.

  12. #12
    You make me proud!! sarge and sometimes much needed dad

  13. #13
    Join Date
    Jan 2005
    Location
    San Antonio, TX
    Posts
    918
    Good to know you better, Robert.

  14. #14
    Join Date
    Feb 2006
    Location
    Buse Township, MN
    Posts
    1,500
    Great interview Robert! Good luck on the upcoming retirement and new monster lathe!
    Officially Retired!!!!!!!! Woo-Hoo!!!

    1,036 miles NW of Keith Burns

  15. #15
    Join Date
    Jul 2005
    Location
    East of the Mississippi
    Posts
    3,807
    Robert, great interview ! You really are nicer than you look. You are not at all as I had you pictured in my mind (thank goodness).

    Now, as for Andy's remark, we'll just consider the source !
    941.44 miles South of Steve Schlumph

    TURN SAFE

Similar Threads

  1. SMC Turner Interview - Jonathon Spafford
    By Andy Hoyt in forum Member Interviews
    Replies: 22
    Last Post: 07-24-2007, 12:20 PM
  2. SMC Turner Interview - Gary DeWitt
    By Andy Hoyt in forum Member Interviews
    Replies: 15
    Last Post: 10-29-2006, 9:14 PM
  3. SMC Turner Interview - Cecil Arnold
    By Andy Hoyt in forum Member Interviews
    Replies: 16
    Last Post: 10-20-2006, 2:00 PM
  4. SMC Turner Interview - Karl Laustrup
    By Andy Hoyt in forum Member Interviews
    Replies: 24
    Last Post: 10-08-2006, 1:10 PM
  5. Turner Interview: Keith Burns
    By Mark Cothren in forum Member Interviews
    Replies: 29
    Last Post: 04-01-2006, 2:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •