Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: SMC Turner Interview - Neal Addy

  1. #1
    Join Date
    Aug 2005
    Location
    Benton Falls, Maine
    Posts
    5,480

    SMC Turner Interview - Neal Addy

    Name: Neal Addy

    Physical description:
    My wife just says "tall, dark, and handsome". At 5'8", 155 lbs I'm obviously not tall, so her judgment is in question.

    Where is home:
    Fort Worth, Texas, or as we call it: "Foat Wuth". Been here 28 years. I'm a native-born Texan but couldn't stay put long. Lived in Galveston, Topeka, Wichita, Arkansas City (where's that?), Houston, and KC, Mo. You railroad folks might detect a pattern there.

    Family information:
    Married to a wonderful woman who's far above my station. I've got two kids (twins), she's got four. Yes, we are blessed, doubly so since all the kids are grown. We've got a three-year-old granddaughter, a grandson just born in early June and another on the way in December. We also have a cat (or is that the other way around?) who doesn't understand where all these new kids keep coming from.

    Do you have a website? If so, what's the URL?

    Just a family site at the moment and while I have been working on a turning-related site, it's still in early development.

    Oh no it’s not!


    Vocation:

    I manage application software testing for (let's just say) a "large organization", mostly Unix/web-based systems.

    Shop Overview:
    Two-car work shop. I currently own two lathes, a Jet 14" bandsaw, basic drill press, and various dust control equipment. Not much in the way of flatwork aside from the usual cache of small power tools. I figure the day I buy a table saw is the day SWMBO will want me to construct that built-in library she always wanted (thus taking valuable time away from turning).

    How many lathes do you own?

    Two – a Jet mini and Jet 1442. The mini was bought one day on a whim while wandering through my local Woodcraft. I thought, "hmmm... there's an inexpensive way to get into woodworking". Famous last words. Bought the 1442 about 18 months later. It's a good machine that serves me well so I should be set for a while. More famous last words.

    Why is your shop air-conditioned?
    Now there's a good idea!

    How many turning tools do you have?
    I own about a dozen Sorby and a few Crown tools, including a Crown mini set. Favorite tools are my beloved skew and a round-nose scraper that I've modified into a cutting tool. I also have a Talon (w/ #2, step, and spigot jaws) and several home-made donut chucks, jam chucks, etc.

    How long have you been turning, and what got you started in the first place?

    I'm only in my fourth year but still consider myself a beginner. Started turning in April, 2004. Turned about a hundred pens in the first two months and was hooked on bowls by June. I got started when we bought a new home and realized that my nice, clean garage would make a
    great wood shop. It hasn't seen a car (or been clean) since.

    What's your favorite flavor of ice cream?

    Moxie Chocolate chip. Mmmm, mmm.

    What do you enjoy most about turning?
    I love the immediacy of turning. Unlike flatwork you literally watch a turned piece take shape right before your eyes. I also love the fact that each piece of wood is a blank canvas with infinite possibilities. Yet each blank "speaks" to us. It gives us subtle hints that allow us (if we listen) to lovingly coax from it the natural beauty hidden within.

    What do you enjoy the least about turning?
    Hollowing a small-opening HF. Absolutely hate it. I subscribe to the school of "no interior should go unfinished". As such I constantly struggle to get a perfectly smooth and consistent inside wall, and rarely with perfect success. My only other gripe is lack of turning time. Texas weather doesn't allow a very long "turning season".

    What was your first completed turned project? You get bonus points for a picture of it.
    See the magnificent Oak 'thingy' below. Note the delicate foot, the elegant beads, the graceful stem. This was turned the first day after buying my mini and a set of Crown mini tools. In my ignorance I thought that the Crown mini tool set would be enough for my needs (hey, I only wanted to turn small pieces, right?). It's a wonder I wasn't put off to turning forever. I was back at the store the next day for full-size tools.

    addy 01.jpg

    What's your favorite individual piece that you have turned, and why?
    Awww... can't I pick two? The Zebrawood piece is probably my favorite. I just love working with Zebrawood. The other is Black Limba, an interesting wood that finished very nicely.

    addy 02.jpg addy 03.jpg

    What's your favorite form that you turn?

    Hollow forms with lid and finial. I love turning finials. Gives me a chance to use the skew.

    addy 04.jpg

    What color carpeting is on your shop floor?
    Grey shag. Great for the toes and curlies.

    What do you not turn now that you want to - or plan to - in the future?
    Someday I hope to turn something decent.

    addy 05.jpg

    How do you take your Moxie? (Straight up? beer chaser? neat? With grits?)
    Straight and unchilled. I just pour it directly over the fire ant mound.

    What's your favorite form someone else turns?
    Difficult, there are so many. Being partial to hollow forms I really enjoy the HF work we see here on SMC. There are quite a few Creekers that I consider true artists. I also admire the lidded-vessel work of Cindy Drozda. I would guess that she has had the most influence on my
    own turning. Her sense of form, proportion, and balance are wonderful.

    What's your favorite individual piece someone else has turned, and why?
    Again, there are too many to choose from. This is probably one of them.

    What's your favorite wood to work with and why?
    African Blackwood. I love how it turns and finishes.

    Operators are standing by during this pledge break
    Only the Blue Roads

  2. #2
    Join Date
    Aug 2005
    Location
    Benton Falls, Maine
    Posts
    5,480
    What brought you to SMC?
    Had seen references to it on other sites and thought it would be a good place to check for opinions on dust control. It was, and much more.

    What was your first post about? Or don't you remember?

    Just a howdy-doody post to the Creekers.

    Nope. Ya chimed in with something rather ugly.


    Do you recall the first thread you started?
    Yep. The one mentioned above.

    Nope – this one beat it out by about six hours.


    What's your favorite old thread (started by someone else) on SMC?
    Again, there have been so many. Probably this one.

    Have you met or hung out with any fellow Creekers? Tell us about it.

    I've had the good fortune to meet several of the FW gang at our local club meeting. Let's see... Bill Boehme, John Chandler, Randy Johnson, and Max Taylor just to name a few. All great folks!

    Got any nicknames? How'd you get them?

    Most folks just call me "Hey, you!".

    Now let's get a little deep... If you were a turning tool, what tool would you be and why?

    Round-nose scraper. I'm kinda dull in the end.

    If you won the Kentucky Derby what part of your life would change?
    Was I the horse or the rider? Makes a difference. I guess if I hit the jackpot I would retire, buy a Mayo (or two), move to the mountains, build a dream shop, and turn to my heart's content.

    Sheesh! He waits ‘til the very end to pledge allegiance. Oh well. At least he did.

    Thanks, Neal. Here is some more of your stuff I've found scattered about.

    addy 06.JPG addy 08.jpg

    addy 09.jpg addy 10.JPG
    Last edited by Andy Hoyt; 08-04-2007 at 11:00 PM.
    Only the Blue Roads

  3. #3
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    28,504
    Nice to know more about you Neal! Beginner.....not in my book!
    Ken

    So much to learn, so little time.....

  4. #4
    Great to know more about you Neal! You do some incredible work.

  5. #5
    Join Date
    Oct 2006
    Location
    Harvey, Michigan
    Posts
    20,801
    Neal - thanks for taking the time to do the interview! Great to get to know you a little better! I already have most of what you have posted saved to my favorites file - thanks for that!! - and I am always looking forward to what you will be posting next!
    Steve

    “You never know what you got til it's gone!”
    Please don’t let that happen!
    Become a financial Contributor today!

  6. #6
    Join Date
    Jan 2005
    Location
    Goodland, Kansas
    Posts
    22,605
    Neal great interview. It is nice to know you better.
    Bernie

    Never put off until tomorrow what you can do the day after tomorrow.

    To succeed in life, you need three things: a wishbone, a backbone and a funnybone.



  7. #7
    "Hey, You!"....... Get back out to that shop and turn some more of that cool stuff!
    Great interview Neal, I love your work.

  8. #8
    Join Date
    Dec 2004
    Location
    St. Louis
    Posts
    3,349
    Great interview, Neal.
    Where did I put that tape measure...

  9. #9
    Join Date
    Aug 2006
    Location
    Rio Rancho, NM
    Posts
    2,568
    Great interview, Neal, and beautiful work. I envy your talent.

    Nancy
    Nancy Laird
    Owner - D&N Specialties, Rio Rancho, New Mexico
    Woodworker, turner, laser engraver; RETIRED!
    Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
    SMC is user supported. http://www.sawmillcreek.org/donate.php
    ___________________________
    It's nice to be important, but it's more important to be nice.

  10. Thanks for the interview, Neal. Your work is top shelf.

    But the burning question in my mind is..............have you drunk water from a hoofprint?

  11. #11
    Join Date
    Jan 2005
    Location
    San Antonio, TX
    Posts
    918
    Nice interview, Neal. I really admire your work.

  12. #12
    Join Date
    May 2006
    Location
    Roanoke Virginia
    Posts
    2,694
    Blog Entries
    2
    Neal great interview, you do some nice work for a beginner, and if you are I may as well give up. Thanks for the interview.
    [SIGPIC][/SIGPIC]Tom

    Turning comes easy to some folks .... wish I was one of them

    and only 958 miles SE of Steve Schlumpf

  13. #13
    Great interview Neal ... You do great work!

  14. #14
    Join Date
    Dec 2006
    Location
    Lubbock, Texas
    Posts
    914
    Neal, beginner? What is he smokin'!!

    Nice to hear from all the Texas Folk lately. If it didn't take 6 hours for us all to meet in a central location we should have a creeker gatherin' of the Lone star folks.

    I'm loving reading all the stuff about ya Neil, great interview!!!
    Be a mentor, it's so much more fun throwing someone else into the vortex, than swirling it alone!

  15. #15
    Join Date
    Feb 2006
    Location
    Bedford County, Virginia
    Posts
    2,325
    Neal, for a beginner you ain't half bad.

    You know the saying, some got it some don't....well you most definitely "got it." Beautiful stuff. I always enjoy seeing your work.

Similar Threads

  1. SMC Turner Interview - Jonathon Spafford
    By Andy Hoyt in forum Member Interviews
    Replies: 22
    Last Post: 07-24-2007, 12:20 PM
  2. SMC Turner Interview - Gary DeWitt
    By Andy Hoyt in forum Member Interviews
    Replies: 15
    Last Post: 10-29-2006, 9:14 PM
  3. SMC Turner Interview - Karl Laustrup
    By Andy Hoyt in forum Member Interviews
    Replies: 24
    Last Post: 10-08-2006, 1:10 PM
  4. Turner Interview: Keith Burns
    By Mark Cothren in forum Member Interviews
    Replies: 29
    Last Post: 04-01-2006, 2:22 AM
  5. Neander Interview: Alan Turner
    By Zahid Naqvi in forum Member Interviews
    Replies: 18
    Last Post: 02-22-2006, 8:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •