For those of you that turn pens, where do you get your kits from??
For those of you that turn pens, where do you get your kits from??
Most of mine come from Craft Supply or Woodcraft. Lots of other places though, as I'm sure you will hear...
Mike
I get mine from BearTooth Woods. He is good to deal with and definitely will take care of you.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Berea. Their kits are sold through Craft Supply, Arizona Silhouettes, Woodworker's Supply, and many other retailers. If you go to their site, http://www.bereahardwoods.com/new/index.cfm, you can either by phone, mail, or e-mail, as their on-line ordering function has never been activated. One of the great things about Berea is that no matter how much you order, they charge a flat $4.00 for shipping.
Nancy (132 days)
Nancy Laird
Owner - D&N Specialties, Rio Rancho, New Mexico
Woodworker, turner, laser engraver; RETIRED!
Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
SMC is user supported. http://www.sawmillcreek.org/donate.php
___________________________
It's nice to be important, but it's more important to be nice.
I get most of my kits from Berea Hard wood. Nice people, that also support the FPP
Earl
Shane, if you do call Berea........ask for Larry. GREAT guy, he'll definitely take care of you.
Joe
------------------------------------------------
Experience...is simply the name we give our mistakes.
Oscar Wilde
.................................................. ..................
Nancy Laird
Owner - D&N Specialties, Rio Rancho, New Mexico
Woodworker, turner, laser engraver; RETIRED!
Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
SMC is user supported. http://www.sawmillcreek.org/donate.php
___________________________
It's nice to be important, but it's more important to be nice.
Making sawdust mostly, sometimes I get something else, but that is more by accident then design.
Well I just got a $15.00 coupon in the mail for Wood Craft and i was going to stock up on pen kits. What is the Wood Craft Gold??
Ralph, if you'll go to this thread: http://www.sawmillcreek.org/showthre...ighlight=Berea, post #19, you'll see that some of the kits sold by CSUSA ARE Berea kits, just repackaged for the end retailer. CSUSA sells a lot of other imported kits, but they also sell Berea--if you'll go to their website and compare the pictures to the ones on the Berea site, the pictures are identical. They are using stock photos supplied by Berea in the CSUSA catalog.
Nancy (130 days)
Nancy Laird
Owner - D&N Specialties, Rio Rancho, New Mexico
Woodworker, turner, laser engraver; RETIRED!
Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
SMC is user supported. http://www.sawmillcreek.org/donate.php
___________________________
It's nice to be important, but it's more important to be nice.