Page 1 of 2 12 LastLast
Results 1 to 15 of 26

Thread: Router Bit Storage

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Router Bit Storage

    I am curious about what you folks do for router bit storage. I am designing a router stand and could use some comments to help decide whether to a) drill 1/4 and 1/2 dia holes in a block and stick the bits in some order in the block, or rather b) continue to keep the bits in the plastic bags they come in and store in several plastic compartmented boxes (like tackle boxes). I suppose it is up to one's choice but are there any negatives to having the bits "out in the air" so to speak?

    Would appreciate hearing about your approach and any suggestions.

    Thanks.

  2. #2
    Join Date
    May 2007
    Location
    North Dakota
    Posts
    660
    Ken, I had a piece of Corian type material that I drilled holes in and inserted the bits into it. I put it all into a drawer in my tool cabinet for now till I build a router table with drawers. I don't like carbide touching anything when storeing because it's so hard it's brittle.

  3. #3
    Join Date
    Nov 2006
    Location
    Vancouver, BC
    Posts
    858
    I keep mine in 1/4 and 1/2" holes drilled in a block of wood and store in a drawer. Seems to work fine.

  4. #4
    Join Date
    Jan 2006
    Location
    Brooklin ON Canada
    Posts
    311
    Here's my cabinet; Plans from "WOOD".
    Router Bit Storage 001 (Small).jpg
    22" X 26" X 6" deep, hangs on the wall with french cleats.
    Router Bit Storage 003 (Small).jpg
    And it's too small already!
    [SIGPIC][/SIGPIC]
    Mack C. in Brooklin ON Canada

    It feels really great to sell a pen;
    It feels even greater to give one to a friend!

    If your presence doesn't make an impact;
    Your absence won't make a difference!

  5. #5
    I use these from Lee Valley. Not fancy but they work great.

  6. #6
    Join Date
    Feb 2003
    Location
    South Jersey
    Posts
    1,571
    I bought a deep rubbermaid container, cut a piece of wood to fit it and drilled holes in it. Only have a dozen or so bits so they are all in one place. I like the showcase that Mack posted above. He's got a better selection then Home Depot!

  7. #7
    Join Date
    Jun 2005
    Location
    Trinity County California
    Posts
    729

    Smile Router Bit Storage

    Two strategies worked for me. With about 100 bits, I couldn't keep them in original containers, or just rattling around in a drawer because of the danger of damaging the carbide edges, and for organization.

    1) I got a used, beat up plexiglass display case from my tool dealer. That goes up on the wall. Great for organization, and for visibility. You can buy these for about $40 from Woodcraft new.

    2) Highland Hardware sells a beautifully made hardwood case with a lid and capacity for 25 half inch bits and 25 quarter inchers. This takes wide diameter cutters and keeps them save. Although they are hidden from site. Cost is $29.

    Bits that are out in the open will accumulate a lot of sawdust. And you need to prevent corrosion, so a lid or plexiglass door help.

    Gary Curtis

  8. #8
    Quote Originally Posted by Mack Cameron View Post
    Here's my cabinet; Plans from "WOOD".
    Router Bit Storage 001 (Small).jpg
    22" X 26" X 6" deep, hangs on the wall with french cleats.
    Router Bit Storage 003 (Small).jpg
    And it's too small already!
    Was that in the Magazine or did you find the plans online? Can you advise source?

    Thanks!

  9. #9
    Join Date
    Jan 2006
    Location
    Brooklin ON Canada
    Posts
    311
    [quote=Jeffrey Schronce;651911]
    Was that in the Magazine or did you find the plans online? Can you advise source?
    Hello Jeffrey; WOOD Dec. '03 Iss. # 153 pge 69. It was a special insert with Freud bits on one side and the plans on the other.
    [SIGPIC][/SIGPIC]
    Mack C. in Brooklin ON Canada

    It feels really great to sell a pen;
    It feels even greater to give one to a friend!

    If your presence doesn't make an impact;
    Your absence won't make a difference!

  10. #10
    [quote=Mack Cameron;652058]
    Quote Originally Posted by Jeffrey Schronce View Post
    Hello Jeffrey; WOOD Dec. '03 Iss. # 153 pge 69. It was a special insert with Freud bits on one side and the plans on the other.
    Thanks. maybe I can check with Freud and see if they have a copy of it.

  11. #11
    Join Date
    Jan 2006
    Location
    Brooklin ON Canada
    Posts
    311
    Jeffrey; I see WOOD #153 is available on the WOOD site.
    http://store.woodstore.net/is15de20.html
    [SIGPIC][/SIGPIC]
    Mack C. in Brooklin ON Canada

    It feels really great to sell a pen;
    It feels even greater to give one to a friend!

    If your presence doesn't make an impact;
    Your absence won't make a difference!

  12. #12
    Join Date
    Jul 2003
    Location
    Rochester, NY
    Posts
    4,717
    The sky's the limit... I tend to keep my sets in the original boxres. The loose bits are in a shallow drawer. To save some height, the bits are set at an angle in a block of wood...a few rows of them holds alot of bits. If you drill material to hold your bits, I'd suggest making them slightly over the aim size...especially if you use wood.
    Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

  13. #13
    Exactly. Don't drill half inch holes. Make them 17/32 or 33/64. You'll be glad you did...

    Don't ask me how I know...

    Thanks,

    Bill

  14. #14
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,694
    I had them in drawers in my previous router table (with inserts containing holes the same diameter as the shanks to hold the cutters), but need to build a cabinet for them since I changed my setup not long ago. It may very well be a dedicated drawer in the tool cabinet I'm soon to make.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  15. #15
    Join Date
    Jan 2005
    Location
    Waterford, MI
    Posts
    4,673
    Very low (no) tech. I just keep them in the plastic envelopes or little cases they were purchased in. Not super elegant but each one is labeled and they're protected from dust or corrosion. I think 95% of mine are confined to two 2" high drawers in the cabinet under my router table.
    Use the fence Luke

Similar Threads

  1. Motorized Router Lift
    By George M. Perzel in forum General Woodworking and Power Tools
    Replies: 24
    Last Post: 04-25-2010, 10:56 PM
  2. Making a hole for a router base in a table
    By Brian Kent in forum General Woodworking and Power Tools
    Replies: 10
    Last Post: 07-08-2007, 9:55 AM
  3. Freud FT2000e Router switch problem.
    By Dave Falkenstein in forum General Woodworking and Power Tools
    Replies: 9
    Last Post: 01-24-2006, 2:59 PM
  4. Router Feed Direction
    By Teresa Jones in forum General Woodworking and Power Tools
    Replies: 5
    Last Post: 01-15-2004, 1:03 PM
  5. Router making funny noise?????
    By paul comer in forum General Woodworking and Power Tools
    Replies: 3
    Last Post: 01-07-2004, 11:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •