Results 1 to 4 of 4

Thread: Need Band Saw Blade Recommendation

  1. #1
    Join Date
    Jan 2007
    Location
    McDonough, GA (near Atlanta)
    Posts
    392

    Need Band Saw Blade Recommendation

    I plan to cut several Christmas figurines on my 14" 1HP Jet bandsaw. The blade is 93.5" long and given the curves on the figurines, I think I need a 1/4" blade. I will be cutting the figurines out of 5.5" walnut. Can anyone recommend a band saw blade for this application as well as a source for that blade? Thanks very much!

    Steve

  2. #2
    Join Date
    Nov 2003
    Location
    Cave Creek, AZ - near Phoenix
    Posts
    1,261
    Call these folks and get your recommendation and your blade at the same place:

    http://www.suffolkmachinery.com/
    Dave Falkenstein aka Daviddubya
    Cave Creek, AZ

  3. #3
    Join Date
    Jan 2007
    Location
    McDonough, GA (near Atlanta)
    Posts
    392

    Band Saw Blade

    Dave:

    Thanks for the advise. I called Suffolk and they were very helpful. They are shipping the blade today. Thanks again.

    Steve

  4. #4
    Join Date
    Nov 2003
    Location
    Cave Creek, AZ - near Phoenix
    Posts
    1,261
    I am happy to know that you are happy.
    Dave Falkenstein aka Daviddubya
    Cave Creek, AZ

Similar Threads

  1. Timberwolf carbide blade
    By Per Swenson in forum General Woodworking and Power Tools
    Replies: 22
    Last Post: 11-22-2009, 10:39 AM
  2. Grizzly G0514x vs Laguna LT16
    By John Karam in forum General Woodworking and Power Tools
    Replies: 31
    Last Post: 12-20-2007, 12:40 AM
  3. THE HNT GORDON SPOKESHAVES - reviewed
    By Derek Cohen in forum Neanderthal Haven
    Replies: 7
    Last Post: 04-13-2007, 9:49 PM
  4. Tablesaw blade height rip setting and kickback
    By Jules Dominguez in forum General Woodworking and Power Tools
    Replies: 13
    Last Post: 08-13-2005, 12:53 PM
  5. Smooth-cutting rip blade burns cherry
    By Jules Dominguez in forum General Woodworking and Power Tools
    Replies: 21
    Last Post: 08-13-2005, 2:40 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •