Does anyone know where I might be able to find a tongue and groove bit set for 3/8" thick stock? I can find them for 1/2" and 3/4" stock, but nothing smaller. Router or shaper bit is acceptable.
[OP]
Member
Does anyone know where I might be able to find a tongue and groove bit set for 3/8" thick stock? I can find them for 1/2" and 3/4" stock, but nothing smaller. Router or shaper bit is acceptable.
Michael Mastin
McKinney Hardwood Lumber
Exotic and figured woods
Moderator
Wow, that is pretty small, Mike. I looked for you as well and found what you've found. Hopefully someone finds what you need!
Good Luck
Posting Permissions
Reply With Quote
