Results 1 to 6 of 6

Thread: Delta 13" planer knives

  1. 03-22-2009, 7:28 PM #1
    Jason White's Avatar
    Jason White
    Jason White is offline [OP] Contributor
    Join Date
    Nov 2006
    Location
    Minnesota
    Posts
    2,287

    Delta 13" planer knives

    I need some new reversible planer knives for my 13" Delta planer.

    Amazon has them for about $50. Seems a little steep considering that they're disposable.

    Anybody else got a less expensive idea?

    Jason
    Reply With Quote Reply With Quote
  3. 03-22-2009, 7:51 PM #2
    Jim O'Dell's Avatar
    Jim O'Dell
    Jim O'Dell is offline Contributor
    Join Date
    Dec 2003
    Location
    West of Ft. Worth, TX
    Posts
    5,815
    Jason, you can try your local Lowe's. They may be out of the 13", mine are now, but I bought one set for about 18.00 a couple years ago. Didn't say they were closing them out, but they may have been. Jim.
    Coolmeadow Setters...Exclusively Irish! When Irish Eyes are smiling....They're usually up to something!!
    Home of Irish Setter Rescue of North Texas.
    No, I'm not an electrician. Any information I share is purely what I would do myself. If in doubt, hire an electrician!
    Member of the G0691 fan club!
    At a minimum, I'm Pentatoxic...Most likely I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, s3.
    Reply With Quote Reply With Quote
  4. 03-22-2009, 7:58 PM #3
    Jason White's Avatar
    Jason White
    Jason White is offline [OP] Contributor
    Join Date
    Nov 2006
    Location
    Minnesota
    Posts
    2,287
    Lowe's no longer carries them.


    Quote Originally Posted by Jim O'Dell View Post
    Jason, you can try your local Lowe's. They may be out of the 13", mine are now, but I bought one set for about 18.00 a couple years ago. Didn't say they were closing them out, but they may have been. Jim.
    Reply With Quote Reply With Quote
  5. 03-22-2009, 8:50 PM #4
    Bill Swanson
    Bill Swanson is offline Member
    Join Date
    Feb 2008
    Posts
    33

    I just use a Jig and sharpen them

    If they are not to bad you can try this:

    I have attached pictures of the one I use. Can be done on glass with sandpaper or with a diamond stone. or sandpaper on MDF.
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  6. 03-22-2009, 9:12 PM #5
    Jason White's Avatar
    Jason White
    Jason White is offline [OP] Contributor
    Join Date
    Nov 2006
    Location
    Minnesota
    Posts
    2,287
    Mine are pretty badly nicked. I wouldn't even try to sharpen them.



    Quote Originally Posted by Bill Swanson View Post
    If they are not to bad you can try this:

    I have attached pictures of the one I use. Can be done on glass with sandpaper or with a diamond stone. or sandpaper on MDF.
    Reply With Quote Reply With Quote
  7. 03-22-2009, 11:54 PM #6
    Ryan Griffey
    Ryan Griffey is offline Member
    Join Date
    Dec 2008
    Posts
    69
    One of the better prices I have found. I pick some up now and then when I order Blum Slides.

    http://www.ahturf.com/catalog/itemde...037%07z%079d51
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules