Here is a dust shoe I made for my new router. I have posted this on a couple of other forums, but I thought I would add some input to this one!
The shop photo shows my setup along with the shop supervisor, Duke.
[OP]
Member
Here is a dust shoe I made for my new router. I have posted this on a couple of other forums, but I thought I would add some input to this one!
The shop photo shows my setup along with the shop supervisor, Duke.
ULS X-2 660, Corel X3, Haas VF4, Graphtec vinyl cutter, Xenetech rotaries (3), Dahlgren Tables, Gorton P2-3, New Hermes pantographs (2), and recently, 24" x 36" chinese router. Also do sublimation, sand blasting, & metal photo. Engraver since 1975.
Posting Permissions
Reply With Quote