Hi all. I have an Epilog 30W and would like an inexpensive table top (mini) engraver. What experiences have you had with the imported engravers always found on Ebay? They are usually less than $2000. Thanks all!
Hi all. I have an Epilog 30W and would like an inexpensive table top (mini) engraver. What experiences have you had with the imported engravers always found on Ebay? They are usually less than $2000. Thanks all!
Ramon
I suggest you do a search of the various postings on Chinese lasers.
The search tool is on the menu bar.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
I bought one secondhand from a user on here. Not really secondhand since it had never been fired, but for a secondhand price that made me smile (thanks again Dee!).
I had a couple small issues - water pump was junk, easily replaced at home depot. Also, one of the wires was improperly secured, which took me about 20 minutes to find and 5 minutes to fix. I've run a few small jobs on it and everything went perfectly. If you're handy and can fix minor issues, I'd say they're a steal.
thanks for feedback!
No problem. Drop me an email if you have any more questions.