More people that also it makes tombstones....??
More people that also it makes tombstones....??
Augusto
Welcome to SMC.
What type of equipment do you have and what kind of things do you want to do?
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
I want to buy a laser machine chinese i read so many things that now i have afraid Lol. i post the caracheristics of the laser. give me some help please
Working Size: 1200mm*800mm
Laser power: 80W
Laser Tube: Co2 sealed glass laser tube
Engraving speed: 0-60000mm/s
Cutting speed: 0-10000mm/s
Up and down working plate: 50cm
Cooling system: water-cooling and protection system
Repeating location: ±0.1mm
Resolution ratio: 0.025mm
Support graphic format: DST, PLT, BMP, DXF
Operating temperature: 5-40°C
Operating humidity: 5%-95% free of condensed water
the laser tube has the duration of 3000 hours
I would be worried that it can't handle the weiight of a headstone. That is a lot of mass and may well be a problem. That is why most of them done here in the US are done on Vytek or Kern lasers. Industrial and heavy duty. Check and see the maximum weight capacity of the machine that you are looking at and make sure that the z axis clearance is enough to clear the stone and still focus.
Sandee Force
A few dollars spent contributing to SMC will save you hundreds of dollars in time and materials.