Ok, I am so close to getting my new workbench done I can't stand it. I was attaching the end aprons last night, and after countersinking and drilling out the hole with the proper drill bit, and applying wax to ease the screw in the head broke off just inside the countersink. Now I have a screw that is broke just inside the hole that spins where I need to have a plug. Does anyone have any suggestions how to remove the screw head without causing damage to the surrounding wood? I have used a biscuit cutter and glue so the screw is not really needed. Also, can anyone recommend a good brand of screw? I thought that the ones I have were a decent brand but I guess not. Thanks for the help.
Oh this is from last weekend but I have attached a pic of the base. I now have the top on, and the shelf in the base.