Hole in One trophy

[Tim Baude]

Hi all,
I have a friend who has 3 hole in ones. He has a trophy for one, but would like a dual one for the other 2 as he got them very close together last summer. Does anyone know of a supplier? If I can't find a dual, I still need to find 2 for him. Any help would be great, or if someone can think of an alternative that would be great.

Tim

[Craig Hogarth]

I believe JDS has the hole in one trophy figure. You should be able to mount two on a trophy

[Tim Baude]

Thanks Craig,
I think they do also, but I guess I wasn't specific....I would like one that will hold the balls he used for the hole in ones. I am also trying to figure out maybe how to make one.....any help on either end would be great.
Tim

[matt heinzel]

The hole in one from JDS does have a spot to hold the golf ball. We sell them at our store.

[Stephen Beckham]

Tim,

I used the one Matt has displayed and put two verically on a plaque for a fella - put a plate in the middle with both dates, hole numbers and etc...

[Edsel Emery]

I used the same one on a plaque with the scorecard underneath...lots of possibilities here.

[Mike Null]

Same as Ed. I'm making one today with scorecard, ball and plate with info.

If it looks good I'll post it. My neighbor works for AB so I'm doing this for a case of beer.

[Stephen Beckham]

Hey Mike - what's that amount of sales tax collected when paid in beer? Is it measured in Hops or Barley?

Could you imagine that? If you stated "If I had a beer for every donated plaque/trophy..."

[Mike Null]

No tax on favors but I hope I collect before he gets laid off. He is currently on their free beer program.

[Mike Null]

Here's the plaque. 11 x 15 solid walnut. Brass plate has been laser sublimated.

[Tim Baude]

Looks great Mike,
Can I ask how you attached the golfball? I couldn't tell from the picture.
Thanks
Tim

[Mike Null]

That is 5 minute epoxy. I drilled a 3/4" diam. recess 1/8" deep in the plaque.

I tried Weld Bond but it wouldn't set up.