Any painting tips for painting a large area of white acrylic sheet?
I tested an area tonight using Valspar Plastic Paint and some letters made with vinyl stencil mask. The mask worked great--the paint did not bleed underneath the mask at all, the mask peeled readily within minutes of painting, and the edges were clean, without pulling any paint from the edges.
I am a little nervous at my spraypainting ability on a large area, however, and could use some advice. I wonder if I should use a spray gun instead for a wider spray beam. I am confident spray painting smaller parts and letters with a can, but I am not sure how I can ensure even coverage on an 18" x 96" solid area.
The extra caveat is that the sign is back lit. Hopefully the paint will be thin enough that some of the color (royal blue) will come through. (Of course, the masked areas will show white).
Thoughts?