I am needing a carbide bandsaw blade for re-sawing wet wood. I checked out Timberwolf's site and they sell a 1" blade, but recommend that it be used on an 18" or bigger machine and also on wood with 10% or less moisture content. I happen to have a Grizzley 17" bandsaw. (dang it 1" too small). I will be re-sawing thick stock. often better than 8" thick, all hardwoods with figure in it. (nasty grain) I also looked at Lennox Tri-master blades. I seem to remember that there were some other options but can't recall what they were. Any ideas? Also what sources would any of you recommend?