I'm going to build a cherry dressor and would like to make the drawer fronts curved, so I'll need to laminate the fronts, I've had very little experiene with resawing. I own a 14" powermatic bandsaw and was planning on buying an extension kit for it.
Any advice on a blade, thickness and tooth count.
Any advice on keeping my cut straight, I did resaw some 1/4 sawn oak and had terrible blade drift with a 1/2" blade.
Any advice on how thick I should resaw the laminations, I'd like to have a 3/4" front when completed and want as few laminations that I can get buy with.