Results 1 to 5 of 5

Thread: Shaper cartridge

  1. #1

    Shaper cartridge

    Looking for a Rockwell part # 43-821 3/4" dia long shaper cartridge.
    Any ideas?
    Thanks,
    -C

  2. #2
    Join Date
    Mar 2008
    Location
    Beantown
    Posts
    2,264
    Check with Delta to see if they still have that part. If it's from the HD shaper than it's probably the same spindle still being used today. If they don't have it then check with the guys over at OWWM, (I'm assuming it's an older one if it needs to be replaced) and you may get lucky and find someone with one.
    good luck,
    JeffD

  3. #3

    shaper cart.

    Thanks Jeff,
    Delta has quit making them (some time ago) and no longer has stock. It's kind of a specialized unit, so they didn't make many.
    I'm trying to avoid having one made from my existing one...
    No reply yet over at owwm forum.
    -C

  4. #4
    Join Date
    Dec 2004
    Location
    Ann Arbor, MI
    Posts
    20
    Try calling Jim Austin at Holly Wood Equipment (in Holly, Michigan), he has an amazing inventory of parts for old equipment. He's kinda hard to get ahold of, but a good source for things like this. (248) 634-6234 or his cell from his b'card is (248) 342-4824 Good luck!

  5. #5
    Join Date
    Mar 2008
    Location
    Beantown
    Posts
    2,264
    Another place that has a decent selection of parts is Plaza Machinery (plaza machinery.com), check them out. Otherwise it may be cheaper to buy a new (used) machine over having a new part made.

    good luck,
    JeffD

Similar Threads

  1. Picture of new shaper, question about cutters
    By Silas Smith in forum General Woodworking and Power Tools
    Replies: 16
    Last Post: 03-02-2012, 8:29 PM
  2. Advice needed on new Tool purchase
    By Tom Hurlebaus in forum General Woodworking and Power Tools
    Replies: 32
    Last Post: 05-02-2008, 4:21 AM
  3. Am I crazy - new shaper
    By Tom Jones III in forum General Woodworking and Power Tools
    Replies: 16
    Last Post: 01-30-2007, 11:39 PM
  4. How is a Shaper safer than a Router Table?
    By Chris Rosenberger in forum General Woodworking and Power Tools
    Replies: 40
    Last Post: 02-22-2006, 1:57 PM
  5. Shaper questions
    By Jonathan Goldstein in forum General Woodworking and Power Tools
    Replies: 5
    Last Post: 02-14-2005, 2:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •