If I get a minute I will convert it for you but I don't keep Corel on anything but the laser computer (as it pains me greatly to use Corel on a PC rather than AI on a Mac) which is not near my office, so I may not be able to do it right away...
Meanwhile, why not just import the EPS file into Corel? That is how I do everything (since I prefer to do layouts in AI and just use Corel to "print" from) and it works great.
(By the way - I tried to answer your PM but your ISP said I was spam and bounced the message.)
Have a good one!
Last edited by Erik King; 12-01-2008 at 9:10 PM.
Reason: add
Good evening all,
Here is my tower which I made last year. I saved the file down to an X3 file.
Some of the pieces will have to be duplicated and all will fit onto two 12 x 24" baltic birch panels with the exception of one of the bottom supports, it will have to go onto a third piece. Just rearrange it and it will work.
I would have sent the whole file, but the detail made the file really large, about 411kb, so I could not attach it.
Let me know what you think...
Jim
Jim Watkins
Aliso Viejo, CA.
EPILOG Mini 24 - 45w Corel X4; PhotoGrave 3.0
Nova 1624-44 Lathe