think I'm going to ditch my router table to save space and go with one of the TS extensions with a router plate opening but have a question on how to deal with attaching a fence for the router. This is on a PM66 with PM Accufence and a Woodpecker PRL lift and PC7518 router. Looking at some earlier posts it looks like some folks are attaching some sort of router fence to either the existing TS fence or using the existing fence rails to attach a router fence. A couple of other setups look like they're using slots milled in the extension table and fasteners through the slots/fence for adjustment and locking down.
I'm pretty happy with the PM Accufence and would rather not change anything there other than maybe changing the UHMW faces to something more solid for screw attachments. I've also got a Wixey readout mounted on the rails, so dont think I can clamp anything to that. Do I just use the RH side of the Accufence to attach a router fence or is the slotted extension table the way to go? I'd like to get a fairly basic fence that I can just hang up somewhere when using the saw. Either mounting option seem like it has it's pros & cons, but I'm not sure what I should be focusing on.
?? What to Do ??